Installing The Multibay - Fujitsu PRIMERGY TX150 S6 Options Manual

Installing the multibay

6.4 Installing the multibay
Ê Open the server and remove the front cover or the rack front cover as
described in the
Ê Remove the dummy cover from one 5.25-inch bay for accessible drives:
Ê Press inward on the two metal tongues of the EasyClick rails until the
locking mechanism disengages.
Ê Remove the dummy cover from the bay.
Figure 31: Removing the DVD dummy from the multibay
Ê Release the DVD dummy by pressing the touch point upward (see arrow in
figure 31).
Ê Push the DVD dummy out of the bay in direction of the front side.
Ê Take the dummy out of the frame by extracting sideward the frame until the
four noses of the frame disengage (see
46
chapter "Preparation" on page 21
Options Guide
et seq..
figure 25 on page
Accessible drives
41).
TX150 S6