Table of Contents
Advertisement
Basic Operations for RF Devices Measurement
STEP 8. Measuring DUT and Analyzing Measurement Results
Figure 3-67
Point averaging and sweep averaging
Performing Point Averaging
Step 1. Click
Step 2. Set the averaging count in the
Figure 3-68
Step 2
NOTE
Point averaging is started automatically when the averaging count is set to 2 or larger.
Step 3. Verify that the display of the status bar on the bottom of the screen changes to "Avg x,"
which indicates that the point averaging is performed x times (Figure 3-69).
88
on the
Sweep Setup...
Stimulus
Point Average
menu (Figure 3-13).
box (Figure 3-68).
Chapter 3
Advertisement
Table of Contents
