Basic Operations for Dielectric Measurement
STEP 7. Entering Thickness of MUT
STEP 7. Entering Thickness of MUT
You must enter the thickness of the MUT before you can perform measurement. Use a
micrometer or calipers to measure the thickness.
NOTE
The 16453A test fixture imposes restrictions on the thickness and diameter of the MUT
(see Table 4-1 on page 108).
Step 1. Click
Step 2. Click the
Step 3. In the
thickness, type
120
on the
menu.
Utility...
Utility
Material Option Menu
box, enter the thickness of the MUT. For example, if the MUT is 1 mm in
Thickness
with the keyboard.
[1] [m] [Enter]
button.
Chapter 4