Agilent Technologies E4991A Installation And Quick Start Manual page 126

Basic Operations for Magnetic Measurement
Organization of
This Chapter
o Magnetic Measurement Overview page 127
o STEP 1. Preparation for Measurement page 128
o STEP 2. Selecting Measurement Mode page 130
o STEP 3. Setting Measurement Conditions page 131
o STEP 4. Calibration page 133
o STEP 5. Connecting 16454A page 135
o STEP 6. Fixture Compensation page 137
o STEP 7. Entering MUT Dimensions page 138
o STEP 8. Mounting MUT page 139
o STEP 9. Measuring MUT and Analyzing Measurement Results page 140
o STEP 10. Changing Sweep Conditions page 141
o STEP 11. Measuring Other MUTs page 141
126
Measurement example and a basic flow for magnetic measurement.
How to prepare for measurement.
How to set the E4991A measurement mode to magnetic measurement mode.
How to set sweep conditions and measurement parameters.
How to perform OPEN / SHORT / LOAD (/ LOW-LOSS CAPACITOR)
calibrations.
How to connect the 16454A test fixture to the 7-mm terminal of the test head.
How to perform SHORT compensation. Describes how to perform SHORT
compensation for the 16454A test fixture.
How to enter MUT (magnetic material) sizes.
How to mount a MUT (magnetic material) in the 16454A test fixture.
How to achieve the optimum setting of the vertical axis scale and analyze the
measurement results.
How to change sweep conditions.
How to measure other MUTs.
Chapter 5