Table of Contents
Advertisement
Basic Operations for RF Devices Measurement
STEP 8. Measuring DUT and Analyzing Measurement Results
Step 2. Select
Step 3. The scalar traces of three measurement parameters are displayed at the top of the screen,
and the complex trace of measurement parameter (|Z|) is displayed at the bottom of the
screen.
Step 4. Specify Trace 4 (the polar display format) as the active trace (* mark) as shown in Figure
3-9 and Figure 3-10.
Step 5. Click
Step 6. Select the reflection coefficient (
Figure 3-86
Step 6
Step 7. Select
Figure 3-87
Step 7
Table 3-13
Format
Format
Complex
Polar
Smith
Admittance
Step 8. The display screen as shown in Figure 3-88 is obtained.
100
in the
3 Sclr, 1 Cmplx
Num Of Traces
on the
Meas/Format...
Meas/Format
in the
box (Figure 3-87).
Smith
Format
box settings and Complex traces
box
box as shown in Figure 3-7.
menu (Figure 3-8).
) in the
Γ
Meas Parameter
Complex trace
Complex plane format
Polar coordinate format
Smith chart
Admittance chart
box (Figure 3-86).
Chapter 3
Advertisement
Table of Contents
