Basic Operations for RF Devices Measurement
STEP 6. Fixture Compensation
Step 2. Click the
Figure 3-51
Step 2
Step 3. A √ mark appears on the left side of the
SHORT compensation data measurement.
Validating Fixture Compensation Data
After completing all fixture compensation data measurement, you should use the E4991A
to calculate the fixture compensation coefficient from the measured fixture compensation
data. The coefficient is automatically saved to the internal memory.
Step 1. Confirm that all of the fixture compensation data measurement is completed and then click
the
Figure 3-52
Step 1
76
button (Figure 3-51).
Meas Short
button (Figure 3-52).
Done
button upon completion of the
Meas Short
Chapter 3