Table of Contents
Advertisement
Basic Operations for RF Devices Measurement
STEP 8. Measuring DUT and Analyzing Measurement Results
Step 8. Click the
Figure 3-76
Step 8
Step 9. Click
Step 10. Move the active marker to the point to be read. Then place it on the point of frequency,
which is 1 MHz in this example.
Step 11. Select
Figure 3-77
Step 11
Step 12. Move the active marker to the point to be read.
Step 13. In the same way, place
(Figure 3-78).
NOTE
The marker point for the active marker is indicated by a large triangle (Δ).
94
button to change the button's display to
Marker List
on the
menu (Figure 3-55).
Marker...
Marker
in the
Marker 2
Select Marker
Marker 3
box
(Figure
3-77).
through
on the points to be read individually
Marker 6
(Figure
3-76).
[On]
Chapter 3
Advertisement
Table of Contents
