Agilent Technologies E4991A Installation And Quick Start Manual page 106

Basic Operations for Dielectric Measurement
Contents of this
chapter
o Dielectric Measurement Overview page 107
o STEP 1. Preparation for Measurement page 108
o STEP 2. Selecting Measurement Mode page 110
o STEP 3. Setting Measurement Conditions page 111
o STEP 4. Connecting 16453A page 113
o STEP 5. Entering Thickness of Load Standard page 114
o STEP 6. Calibration page 115
o STEP 7. Entering Thickness of MUT page 120
o STEP 8. Connecting MUT page 121
o STEP 9. Measuring MUT and Analyzing Measurement Results page 122
o STEP 10. Changing Sweep Conditions page 123
o STEP 11. Measuring Other MUTs page 123
106
Measurement example and a basic flow for dielectric measurement.
How to prepare for measurement.
How to set the E4991A measurement mode to dielectric measurement mode.
How to set sweep conditions and measurement parameters.
How to connect the 16453A test fixture to the 7-mm terminal of the test head.
How to enter the thickness of the provided load standard (made of PTFE).
How to perform OPEN, SHORT and LOAD calibrations on the MUT
connection terminal of the 16453A test fixture.
How to enter the thickness of the MUT (dielectric material).
How to connect the MUT (dielectric material) to the test fixture.
How to achieve the optimum setting of the vertical axis scale and analyze the
measurement results.
How to change sweep conditions.
How to measure other MUTs.
Chapter 4