Table of Contents
Advertisement
Basic Operations for RF Devices Measurement
STEP 2. Setting Measurement Conditions
Figure 3-9
Step 4 (using Trace menu)
Figure 3-10
Step 4 (using the mouse)
Step 5. The
Step 6. Select
Figure 3-11
Step 6
Step 7. Specify Trace 2 as the active trace (* mark) as shown in Figure 3-9 and Figure 3-10.
Step 8. Select
Figure 3-12
Step 8
Step 9.
The Format
Step 10. Specify Trace 3 as the active trace (* mark) as shown in Figure 3-9 and Figure 3-10.
48
box is set to
Meas Parameter
in the
Log Y-Axis
Format
in the
Ls
Meas Parameter
box is set to
Lin Y-Axis
in the initial state.
|Z|
box (Figure 3-11).
box (Figure 3-12).
in the initial state.
Chapter 3
Advertisement
Table of Contents
