Table of Contents
Advertisement
Setting the Measurement Parameters and Display Formats
Step 1. Click
Figure 3-6
Step 1
Step 2. Select
Figure 3-7
Step 2
Table 3-3
Num Of Traces
Num Of Traces
x Scalar
x Complex
*1.[x] represents the number of displayed traces.
Step 3. Click
Figure 3-8
Step 3
Step 4. Specify Trace 1 as the active trace by either of the following methods. When it is made
active, "*" appears immediately before Trace 1.
•
Click
•
Move mouse pointer to
screen, where the cursor changes to a finger icon (
[Ω]
Chapter 3
on the
menu (Figure 3-6).
Display...
Display
in the
3 Scalar
Num Of Traces
box and Types of traces
box
Type of trace
Scalar trace
*1
Complex trace
*1
on the
Meas/Format...
Meas/Format
on the
menu (Figure 3-9).
Scalar 1
Trace
1: |Z| [Ω]
.
Basic Operations for RF Devices Measurement
STEP 2. Setting Measurement Conditions
box (Figure 3-7).
menu (Figure 3-8).
or
(white framed area) on the display
2: θz [rad]
) (Figure 3-10). Then Click
1: |Z|
47
Advertisement
Table of Contents
