Table of Contents
Advertisement
Basic Operations for Magnetic Measurement
STEP 9. Measuring MUT and Analyzing Measurement Results
STEP 9. Measuring MUT and Analyzing Measurement
Results
After performing calibration, the measurement results are displayed on the screen when the
MUT is set on the test fixture. Analyze the measurement results by using a marker function
while referring to "STEP 8. Measuring DUT and Analyzing Measurement Results" on
page 82 in Chapter 3, "Basic Operations for RF Devices Measurement."
You will obtain the following measurement results by executing auto scale for individual
parameters while using the setup example of "STEP 3. Setting Measurement Conditions"
on page 131.
Figure 5-9
Frequency characteristics of
μ
' μ
-
"
-tanδ
r
r
140
Chapter 5
Advertisement
Table of Contents
