Installing Software; Installing Cable Compensation Data - Agilent Technologies B1542A User Manual

Installing Software

Install the pulsed IV system software as shown below.
1. Exit EasyEXPERT software or Desktop EasyEXPERT software. If the Start
EasyEXPERT window is opened, close it.
2. Insert the pulsed IV system software CD-ROM into the CD-ROM drive.
3. Execute the following file in the CD-ROM.
\Agilent\PLSDIV\PLSDIV_installer.msi
4. Follow the instructions of the setup wizard. And wait until the program
installation is completed.
5. After the installation, remove the CD-ROM from the CD-ROM drive.
Optional for the system with the option B1542A-003. Install the B1542A-003
software as shown below.
1. Exit EasyEXPERT software or Desktop EasyEXPERT software. If the Start
EasyEXPERT window is opened, close it.
2. Insert the B1542A-003 software CD-ROM into the CD-ROM drive.
3. Execute the following file in the CD-ROM.
\Agilent\B1542A_Opt003\B1542A_Opt003_installer.msi
4. Follow the instructions of the setup wizard. And wait until the program
installation is completed.
5. After the installation, remove the CD-ROM from the CD-ROM drive.

Installing Cable Compensation Data

Install the drain cable compensation data as shown below.
1. If the Start EasyEXPERT window is opened, close it first.
2. Insert the drain cable compensation data CD-ROM into the CD-ROM drive.
3. Execute the following file in the CD-ROM.
\DrainSetup\drain_setup.msi
4. Follow the instructions of the setup wizard. And wait until the data installation is
completed.
5. After the installation, remove the CD-ROM from the CD-ROM drive.
Agilent B1542A User's Guide, Edition 4
Installation
Software Installation
2- 21