Fusing Retraction Motor (M12) - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007
6.3.44

Fusing retraction motor (M12)

1. Remove the upper rear cover.
See P.72
2. Remove the protective shield/1 and the protective shield/2.
See the steps 1 to 5 of printer control board removing procedure.
See P.99
[4] [2]
[1]
Confidential – for internal use only, do not distribute
[5]
[3] [4]
A02EF2C411DA
[1]
[2]
A02EF2C178DA
3. Disconnect two connectors [1].
4. Remove the harness from the wire
saddle [2] and the edge cover [3].
5. Remove three screws [4] and
remove the fusing retraction motor
assy [5].
6. Remove two screws [1], and remove
the fusing retraction motor [2].
6. Other
115