Dkvm Blade Group (When Pg-Kvb103 Is Installed) - PRIMERGY BX600 S3 Hardware Manual

Display/Parameter
KVM Redirection
Reset
●
KVM_update group
Performs the firmware update of the installed advanced KVM Module.
When performing updates, set various parameters and click [Update Firmware].
Display/Parameter
Image Name
TFTP IP Address

4.2.10 DKVM Blade Group (when PG-KVB103 is installed)

The installed advanced KVM Module (PG-KVB103) is displayed. The advanced KVM Module can
only be set from the Web UI of Management Blade. CLI is used only for referring information and
cannot be used for setting.
●
Blade Info group
Displays the following information of the advanced KVM Module.
Display/Parameter
KVM blade Manufacture
KVM blade Manufacture Date
KVM blade Serial Number
KVM blade Product Name
KVM blade Model Name
KVM blade Hardware Version
●
Network Configuration group
Sets the installed advanced KVM Module.
When changing the settings, set parameters and click [Apply Changes].
Display/Parameter
Use DHCP (For KVM IP Address)
KVM IP Address
KVM Gateway
KVM Subnet Mask
PRIMERGY BX600 Management Blade Hardware Guide
Description
One of the following is displayed.
[Launch]: When clicked, starts graphical console redirection to the
Server Blade.
[Adv. KVM had been launched by user <Date Time>]: Displays the
graphical console redirection has opened in the Date-Time.
Resets advanced KVM Module.
Description
Enter the file name for updating advanced KVM Module.
Enter the IP address of TFTP server.
Description
Displays the manufacturer.
Displays the manufacture date.
Displays the system serial number.
Displays the product name.
Displays the model name.
Displays the hardware version.
Description
Sets whether to obtain IP address of advanced KVM Module
automatically (enables DHCP).
Sets IP address of advanced KVM Module manually.
Sets Gateway address of advanced KVM Module.
Sets Subnet mask of advanced KVM Module.
53