Using Telnet Via Lan Interface - PRIMERGY BX600 S3 Hardware Manual

5.1.2 Using Telnet via LAN Interface

1
Connect Management Blade to the management terminal using a LAN cable.
"■ LAN Interface Settings" (p.16)
2
Start the Telnet client software in the management terminal and specify the IP
address and port number of the Management Blade to connect the
Management Blade to the management terminal.
(Default value IP address: 192.168.1.1, subnet mask: 255.255.255.0, port number: 3172)
Telnet only opens one session for Management Blade at a time.
It is necessary to set Telnet client software to [VT100]. For more details about how to set client
software, refer to the manual supplied with the client software.
PRIMERGY BX600 Management Blade Hardware Guide
65