PRIMERGY BX600 S3 Hardware Manual page 59

• Boot CPU Operating
Displays the operation mode of the CPU installed to the Server Blades.
- Performance
The CPU installed to the Server Blade in operating in Performance mode.
- not-ready
The CPU is not operating.
●
Blade Info group
Blade Info group displays information about the system board, CPU, memory and voltage of each
Server Blade/Storage Blade installed in the chassis. The correct values may not be displayed
immediately after the Server Blade/Storage Blade is installed. In this case, check again after about 30
seconds later.
• Blade Info, server blade n
Sets the display of Server Blade information and power LED.
Display/Parameter
Host Name
Blade Status
Server LED
OS Type
OS Version
Model
Board Serial Number
Bios Version
Firmware Version
KME Version
Hardware Version
Product Name
Product Version
Manufacture Date
PCI Add-In Card
Daughter Card
Memory Dump Flag
PRIMERGY BX600 Management Blade Hardware Guide
Sets the host name (alphanumeric characters only).
Displays the overall status of Server Blade.
Sets the display of the Server Blade power LED as the Server Blade identification
function. Used to identify the multiple Server Blades installed in the chassis.
• blinking: the Server Blade power LED is blinking.
• off: will not set the Server Blade power LED.
Displays the OS type if ServerView agent is installed to the OS.
Displays the OS version if ServerView agent is installed to the OS.
Displays the model name.
Displays the system serial number.
Displays the BIOS version.
Displays the Baseboard Management Controller (BMC: a micro controller that
controls temperature and voltage sensors on the baseboard) firmware version.
Displays the keyboard mouse emulator (KME) version.
Displays the hardware version.
Displays the product name.
Displays the product version.
Displays the manufacture date.
Displays the status of the PCI Add-In Card.
Displays the status of the I/O expansion board (Fibre Channel Expansion Board,
etc.) installed in the Server Blade.
Displays the status of the memory dump flag.
Description
59