PRIMERGY BX600 S3 Hardware Manual page 76

Chapter 5 CLI
• 5. SNMP IP Filter Table (1_1_13_5)
Performs IP settings that permit SNMP connection.
A maximum of 10 IP that permit SNMP can be registered.
255.255.255.255, that was set at the time of purchase, does not perform IP filtering. When
performing IP filtering, delete it as necessary.
+------------------------------------------+
|
+------------------------------------------+
(1) SNMP IP Filter 1 : 255.255.255.255
(2) SNMP IP Filter 2 : 0.0.0.0
(3) SNMP IP Filter 3 : 0.0.0.0
(4) SNMP IP Filter 4 : 0.0.0.0
(5) SNMP IP Filter 5 : 0.0.0.0
(6) SNMP IP Filter 6 : 0.0.0.0
(7) SNMP IP Filter 7 : 0.0.0.0
(8) SNMP IP Filter 8 : 0.0.0.0
(9) SNMP IP Filter 9 : 0.0.0.0
(10)SNMP IP Filter 10 : 0.0.0.0
Enter selection or type (0) to quit:
●
14. Agent Telnet (1_1_14)
Sets the Telnet agents in the Management Blade.
+------------------------------------------+
|
+------------------------------------------+
(1) Set Telnet Enable
(2) Set Telnet Port
(3) Telnet IP Filter Table
(4) Telnet Disconnection
(5) Set telnet SSL Enable : disable
Enter selection or type (0) to quit:
76
SNMP IP Filter Table
Agent TELNET
: enable
: 3172
page_1_1_13_5
page_1_1_14
|
|