PRIMERGY BX600 S3 Hardware Manual page 36

Chapter 4 Web UI
• Chassis
Chassis and system fan unit information is displayed in the Chassis page. Internal temperature
displays of the chassis and actions for temperature errors can also be set.
The Chassis page is explained below.
Display/Parameter
Chassis Product
Version
System Information
Overall Status
System LED
Rear Fan Door Status
Sensor ID
Status
Ambient Temperature
No
Status
Designation
Temperature
Warning Level
Critical Level
Reaction
Sets the action for each sensor.
- continue
Continues server operations even during a temperature error.
- shutdown-and-poweroff
Performs graceful shutdown of the main power supply of the chassis if temperature reaches a
dangerous level (Critical-Level).
36
Displays the product version of the chassis.
Displays and sets the system information.
Displays the overall status of the system.
Sets the maintenance LED of the chassis as the system indication LED display
function.
• power on: the front and rear maintenance LEDs of the chassis are lit.
• off: the front and rear maintenance LEDs of the chassis are not lit.
• blinking: the front and rear maintenance LEDs of the chassis are blinking.
Rear Fan Door status.
Displays the corresponding system fan units.
• Rear Panel-1: System fan unit 1
• Rear Panel-2: System fan unit 2
Displays the status of the system fan unit.
• open: the system fan unit has been removed.
• closed: the system fan unit has been inserted.
Displays and sets the environment temperature.
Displays the numbers of each temperature sensor.
Displays the status of each temperature sensor.
Displays the location of each temperature sensor.
• Housing-Left, Center, Right: Chassis's left, center, right (Chassis front view)
• Ambient: vicinity of the chassis main power supply
• Switch 1–4: inside the Switch Blade
• PSU-1–4: inside the PSU
Displays the temperature measured by each temperature sensor.
Displays a temperature warning.
Displays a critical temperature.
Displays the action if temperature reaches a dangerous level (Critical Level).
When "Overall Status" is "error" or "critical", the maintenance LED of the chassis blinks,
even if "power on" is ordered.
Description