PRIMERGY BX600 S3 Hardware Manual page 74

Chapter 5 CLI
●
13. Agent SNMP (1_1_13)
Sets the SNMP agents in the Management Blade.
+------------------------------------------+
|
+------------------------------------------+
(1) Set Agent SNMP Enable : enable
(2) Set Agent SNMP Security Enable : disable
(3) Agent SNMP Trap Table
(4) Agent SNMP Community String Table
(5) SNMP IP Filter Table
Enter selection or type (0) to quit:
❑: Parameter
Parameter
1. Set Agent SNMP Enable
2. Set Agent SNMP Security
Enable
3. Agent SNMP Trap Table
4. Agent SNMP Community
String Table
5. SNMP IP Filter Table
74
Agent SNMP page_1_1_13
Setting
❑
enable Sets SNMP service enable/disable. When using applications
❑
disable such as ServerView that communicate on SNMP, set to
enable.
❑
enable Sets whether to ask for user name and password when
❑
disable [System Indication LED Display Button] in ServerView is
used.
- Sets and displays a SNMP trap destination table.
"• 3. Agent SNMP Trap Table (1_1_13_3)" (p.75)
- Sets and displays the SNMP community name.
"• 4. Agent SNMP Community String Table (1_1_13_4)"
(p.75)
- Performs IP settings that permit SNMP connection.
"• 5. SNMP IP Filter Table (1_1_13_5)" (p.76)
|
Contents