PRIMERGY BX600 S3 Hardware Manual page 117

When "Management Blade Wrap Around Event Log Enable" is set to "disable" in Management Blade,
if the maximum number of event logs is reached, no more event logs can be recorded. Periodically
check "Event Log" and save or delete logs as necessary. Save by copying the screen text.
■ Set System Default (1_9)
Returns Management Blade settings to default.
+------------------------------------------+
|
+------------------------------------------+
(1)
(2)
(3)
(4)
(5)
Enter selection or type (0) to quit:
❑: Parameter ❍: Setting at time of purchase
Parameter
1. Set Config Default
2. Set Username/Password
Default
3. Set CMOS Backup Default
4. Set Deployment Default
5. Set Switch Blade Config Default
Set System Default
Set Config Default
Set Username/Password Default
Set CMOS Backup Default
Set Deployment Default
Set Switch Blade Config Default : false
Setting
❍ false
❑
true
❍ false
❑
true
❍ false
❑
true
❍ false
❑
true
❍ false
❑
true
PRIMERGY BX600 Management Blade Hardware Guide
page_1_9
: false
: false
: false
: false
Contents
Returns settings to default. However, IP address, subnet
mask and default gateway will not return to default
settings. Also, Time Zone will become (GMT+0).
Change as necessary.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
Returns user name and password to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
Returns CMOS Backup settings to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
Returns deployment settings to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
This item is not supported.
|
117