PRIMERGY BX600 S3 Hardware Manual page 37

• Fans
The status of fans is displayed and actions for fan failure are set in the Fans page.
The Fans page is explained below.
Display/Parameter
ID
Status
Designation
Normal Revolutions
Reaction
Sets the action for each fan.
- continue
Sets operations to continue even during a fan failure.
- shutdown-and-poweroff
Performs graceful shutdown of the main power supply of the chassis when a fan error occurs.
• Fans Test
A fan operation test can be performed at a set time everyday (Daily test time) in order to predict
fan failure.
• Daily test time
- hour: minute
Time is set in "hours:minutes". The hours should be based on a 24-hour clock.
- disabled
Fan operation test will not be performed.
❑
Fan test at every start-up
If this is checked, a fan operation test will be performed every time the main power supply is
turned on.
• Fans Live Time Counter
Displays and sets the running time and lifetime of the system fan unit.
Display/Parameter
Component Name
Installation Date
Life Time
Expiry Date
Running time
Expiry Reporting Date
Status
PRIMERGY BX600 Management Blade Hardware Guide
Displays the numbers of each fan.
Displays the status of each fan.
Displays the location of each fan.
• Rear 1,2_1–2 fans: system fan unit internal fan
• PowerUnit 1, 2, 3, 4-Fan-1–3: PSU internal fan
(1: power cooling fan, 2 and 3: system fan unit)
Displays the rpm of each fan.
Displays the action of each fan when an error has occurred.
Displays the names of the system fan unit 1 - 4.
Input the installation date of the system fan unit. Not used for this product.
Input the life time of the system fan unit.
It is measured in units of hours (hrs). Not used for this product.
Displays the expiry date of the system fan unit. Not used for this product.
Displays the running time of the system fan unit.
Displays the date when "Contact Check Box" is checked.
Not used for this product.
Displays the status of the system fan unit.
Description
Description
37