PRIMERGY BX600 S3 Hardware Manual page 104

Blade server system
Table of Contents

Advertisement

Chapter 5 CLI
Parameter
Memory Module Socket
Designation
Memory Module Speed
5. Server Blade Voltage Table (1_4_1_5)
Displays the information about the voltage of the Server Blades.
The figure uses BX620 S4 Server Blade as an example.
+------------------------------------------+
|
+------------------------------------------+
(1) Voltage ID 1 : CPU 2 12V
(2) Voltage ID 2 : CPU 1 12V
(3) Voltage ID 3 : 12V
(4) Voltage ID 4 : 3.3V Standby
(5) Voltage ID 5 : 3.3V
(6) Voltage ID 6 : 5V
(7) Voltage ID 7 : RTC Battery
Enter selection or type (0) to quit:
Parameter
Voltage ID n
(n is the voltage sensor number)
• Server Voltage Information Table (1_4_1_5_1)
Displays detailed information about the selected voltage.
+------------------------------------------+
|
+------------------------------------------+
(-) Server Voltage Designation
(-) Server Voltage Status
(-) Server Voltage Minimum Value
(-) Server Voltage Maximum Value
(-) Server Voltage Current Value
(-) Server Voltage Nominal Value
Enter selection or type (0) to quit:
104
Displays the socket location to which memory module is installed.
Displays the operating frequency of the memory bus.
Server Voltage Table
Displays the voltage being measured as the information about the voltage of the
Server Blades. Detailed information about a specific voltage can be displayed by
selecting that voltage sensor number.
"• Server Voltage Information Table (1_4_1_5_1)" (p.104)
Server Voltage Information Table
Contents
|
page_1_4_1_5
Contents
page_1_4_1_5_1
: 12V
: **
: **
: **
: **
: **
|

Advertisement

Table of Contents
loading

Table of Contents