Table of Contents
Advertisement
Chapter 5 CLI
●
Edit Username And Password (1_6_1)
Sets password etc. for the selected user.
+------------------------------------------+
|
+------------------------------------------+
(1) Change Username : root
(2) Change Password : ****************
(3) User Permission : 255
Enter selection or type (0) to quit:
❑: Parameter
Parameter
1. Change Username
2. Change Password
3. User Permission
*: Various setting bitmaps are as follows.
Read Only [LOGIN]
Modify values
Configure users
Reset/Switch Off
Access EMP via CLI
Adv. KVM User
(incl. KVM configuration rights)
Administrator
Passwords and user names can be set to a maximum of 16 characters. Passwords and user names
are case sensitive.
A user name "root" (password "root") that has administrator privileges is set by default. Change the
password of the user name "root" during initial settings.
The username "root" cannot be changed.
114
Edit Username And Password
Setting
-
-
❑
0 – 255
Parameter
page_1_6_1
Enter new name or user name to be changed.
Enter the password to be changed.
Set the user privileges with the value of 0-255 that
is the total of various set bitmaps. (*)
Because this is a complex operation, it is
recommended to perform settings using the Web UI.
Bitmap
Value
0x00000001
1
0x00000010
2
0x00000100
4
0x00001000
8
0x00010000
16
0x00100000
32
0x11111111
255
|
Contents
Advertisement
Table of Contents
