PRIMERGY BX600 S3 Hardware Manual page 78

Chapter 5 CLI
●
15. Agent DNS (1_1_15)
Sets DNS of the Management Blade.
+------------------------------------------+
|
+------------------------------------------+
(1) Set DNS IP Address_1 : 0.0.0.0
(2) Set DNS IP Address_2 : 0.0.0.0
Enter selection or type (0) to quit:
Parameter
1. Set DNS IP Address_1
2. Set DNS IP Address_2
●
17. Agent NTP (1_1_17)
Sets Network Time Protocol (NTP) of the Management Blade.
+------------------------------------------+
|
+------------------------------------------+
(1) Set NTP ENABLE
(2) NTP Server IP
(-) The Lastest Sync Date/Time : Not Ready
(4) Sync Mode
Enter selection or type (0) to quit:
❑: Parameter
Parameter
1. Set NTP ENABLE
78
Agent Network DNS
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
Agent NTP page_1_1_17
: disable
: Sync Afterward
Setting
❑
enable Sets NTP enable/disable.
❑
disable If NTP is enabled, the time of the Management Blade is
synchronized with the NTP server periodically. Specify the
synchronization formation In "(4) Sync Mode".
|
page_1_1_15
Contents
|
Contents