PRIMERGY BX600 S3 Hardware Manual page 47

●
Deployment Table
Displays and sets the following Deployment Parameters for each installed blade. Deployment
Parameters can be used in various types of Deployment software and ServerView.
By selecting an installed Server Blade from the pull down menu the Deployment Parameters of various
Server Blades are set.
Display/Parameter
Chassis ID
Slot ID
MAC Address 1
MAC Address 2
IP Address 1
IP Address 2
Subnet Mask 1
Subnet Mask 2
Default Gateway 1
Default Gateway 2
Hostname
MasterImageReference
Status of Blade
Lan Status of slot
AutomaticRecovery
Status of Cloning
OEM Parameters 1-10
"IP Address", "Subnet Mask", "Default Gateway", "Hostname", "MasterImageReference" are
automatically set by software such as ServerView. Do not make changes unless necessary when
using the various types of Deployment software.
●
PPP and Modem Setting
Not used. Do not set.
PRIMERGY BX600 Management Blade Hardware Guide
Displays the ID of the chassis.
Displays the slot numbers to which Server Blades are installed.
Displays the MAC Address of LAN port 1 and LAN port 2 of the Server Blade.
Displays the IP Address of LAN port 1 and LAN port 2 of the Server Blade.
Displays the subnet mask of LAN port 1 and LAN port 2 of the Server Blade.
Displays the default gateway of LAN port 1 and LAN port 2 of the Server Blade.
Sets the hostname.
Sets the master image directory.
Displays the present status of the Server Blade.
Sets the LAN status.
Sets whether the automatic recovery function is enabled.
Displays the overall status of cloning.
Specifies OEM Parameters.
Description
47