Management Agent - PRIMERGY BX600 S3 Hardware Manual

Chapter 5 CLI

5.4.2 Management Agent

Displays and sets various information of the blade server system.
+------------------------------------------+
|
+------------------------------------------+
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) Server Blade CMOS Backup/Restore
(11) Switch Blade Configuration Backup/Restore
(12) Deployment Parameter
(13) Power Consumption
(14) PPP and Modem Setting
(15) Fiber Channel
(16) PHY Module
(17) FC Switch
(18) Connection Module
(19) Storage Blade
Enter selection or type (0) to quit:
Menu
1. Management Agent
Information
2. Management Blade
3. System Information
4. Server Blade
5. Switch Blade
6. Username And Password
7. Blue Screen
8. Event Log
9. Set System Default
10. Server Blade CMOS
Backup/Restore
11. Switch Blade Configuration
Backup/Restore
12. Deployment Parameter
13. Power Consumption
14. PPP and Modem Setting
70
Management Agent
Management Agent Information
Management Blade
System Information
Server Blade
Switch Blade
Username And Password
Blue Screen
Event Log
Set System Default
Sets the various agents of HTTP and SNMP operating in the Management Blade.
"■ Management Agent Information (1_1)" (p.71)
Displays various information of the Management Blade.
"■ Management Blade (1_2)" (p.80)
Sets and checks system information.
"■ System Information (1_3)" (p.82)
Performs various settings and displays information of Server Blade.
"■ Server Blade (1_4)" (p.96)
Displays and sets various information of the Switch Blade.
"■ Switch Blade (1_5)" (p.111)
Adds users and sets passwords.
"■ Username And Password (1_6)" (p.113)
Not normally used.
Displays and deletes various types of event logs.
"■ Event Log (1_8)" (p.115)
Returns Management Blade settings to default.
"■ Set System Default (1_9)" (p.117)
Performs the backup of and restores information specified by the BIOS setup
utility of the Server Blade.
"■ Server CMOS Backup/Restore (1_10)" (p.118)
Backs up and restores the various settings to Switch Blade.
"■ Switch Blade Configuration Backup/Restore (1_11)" (p.121)
Performs various settings and displays the deployment Parameters.
"■ Deployment Parameter (1_12)" (p.123)
Not normally used.
Not normally used.
|
page_1
Description