PRIMERGY BX600 S3 Hardware Manual page 80

Chapter 5 CLI
●
18. Agent NIC Duplex Mode (1_1_18)
Sets the NIC transmission rate of the Management Blade.
+------------------------------------------+
|
+------------------------------------------+
(-) Execution Mode
(3) NIC Mode : Auto-Negotiation
Enter selection or type (0) to quit:
❑: Parameter
Parameter
Execution Mode
3. NIC Mode
■ Management Blade (1_2)
Displays all the installed Management Blades and their operational mode.
+------------------------------------------+
|
+------------------------------------------+
(1) Management Blade_1 : master
(2) Management Blade_2 : slave
Enter selection or type (0) to quit:
80
Agent NIC Duplex Mode
: Auto-Negotiation
Setting
- Displays current NIC transmission rate settings.
❑
Auto-Negotiation Sets the NIC transmission rate.
❑
100 Full Mode • Auto-Negotiation: auto-negotiation
❑
100 Half Mode • 100 Full Mode: 100Mbps full duplex secure
❑
10 Full Mode • 100 Half Mode: 100Mbps half duplex secure
❑
10 Half Mode • 10 Full Mode: 10Mbps full duplex secure
• 10 Half Mode: 10Mbps half duplex secure
Management Blade
|
page_1_1_18
Contents
|
page_1_2