Adv. Kvm Blade Group (When Pg-Kvb102 Is Installed) - PRIMERGY BX600 S3 Hardware Manual

Chapter 4 Web UI
FC Switch Blade Period Polling
Set Password for Polling Account
Reset

4.2.9 Adv. KVM Blade Group (when PG-KVB102 is installed)

The installed advanced KVM Module (PG-KVB102) is displayed. The advanced KVM Module can
only be set from the Web UI of Management Blade. CLI is used only for referring information and
cannot be used for setting.
●
Blade Info group
Displays the following information of the advanced KVM Module.
Display/Parameter
Adv. KVM blade Manufacture
Adv. KVM blade Manufacture Date
Adv. KVM blade Serial Number
Adv. KVM blade Product Name
Adv. KVM blade Model Name
Adv. KVM blade Hardware Version
●
KVM_Config group
Sets the installed advanced KVM Module.
When changing the settings, set parameters and click [Apply Changes].
Display/Parameter
Use DHCP (For KVM IP Address)
KVM IP Address
KVM Gateway
KVM Subnet Mask
KVM HTTP Port
52
Display/Parameter
Displays the manufacturer.
Displays the manufacture date.
Displays the system serial number.
Displays the product name.
Displays the model name.
Displays the hardware version.
Sets whether to obtain IP address of advanced KVM Module
automatically (enables DHCP).
Sets IP address of advanced KVM Module manually.
Sets Gateway address of advanced KVM Module.
Sets Subnet mask of advanced KVM Module.
Sets HTTP port of advanced KVM Module (default:80). If graphical
console redirection is performed, three consecutive ports from this
setting value are used by advanced KVM Module.
Description
Sets whether or not to enable checking of the FC
Switch Blade settings by the Management Blade on
a regular basis.
Check the [enable] box and click [Apply] to enable
checking the settings on a regular basis.
Sets the password for logging into the FC Switch
Blade.
Note:
This setting is for storing password in the
Management Blade. This setting does not
set the password of the FC Switch Blade.
Resets the FC Switch Blade.
Description
Description