PRIMERGY BX600 S3 Hardware Manual page 87

●
3. System Fan (1_3_3)
Displays and sets the status of the system fan.
+------------------------------------------+
|
+------------------------------------------+
(1) System Fans Table
(2) System Fans Live Time Table
(3) Set System Fans Daily Test Time
(4) Fan Test At Every Start-up
(-) System Fans Overall Status
(6) All Rear Fans Unavailable Reaction
Enter selection or type (0) to quit:
❑: Parameter
Parameter
1. System Fans Table
2. System Fans Live Time Table
3. Set System Fans Daily Test
Time
4. Fan Test At Every Start-up
System Fans Overall Status
6. All Rear Fans Unavailable
Reaction
PRIMERGY BX600 Management Blade Hardware Guide
System Fan page_1_3_3
: disable
: disable
: ok
: continue
Setting
- Displays a table showing the fans installed in the chassis
and PSU.
"• 1. System Fans Table (1_3_3_1)" (p.88)
- Displays and sets the lifetime of the system fan.
"• System Fan (1_3_3_2)" (p.89)
❑
<hh.mm> Sets the time when system fans operation tests are
❑
disable performed everyday.
• <hh:mm>
Time is set in "hours: minutes". Time should be set in a
24-hour clock format.
• disable
Does not perform an operation test.
❑
enable Sets whether system fans operation tests are performed
❑
disable every time fan operations start.
- Displays the overall status of the system fans.
Important:
System fan units are non-durable components
(→ "BX600 S3 Blade Server System Unit
Hardware Guide").
Change settings after replacement.
❑
continue Sets system fan operations if all the system fans cannot be
❑
shutdown-and- operated.
poweroff • continue
System operations are continued.
• shutdown-and-poweroff
Shutdown is ordered for the server and power is turned
off.
|
Contents
87