PRIMERGY BX600 S3 Hardware Manual page 75

• 3. Agent SNMP Trap Table (1_1_13_3)
Sets and displays a SNMP trap destination table.
+------------------------------------------+
|
+------------------------------------------+
(1) Agent SNMP Trap 1 : 0.0.0.0
(2) Agent SNMP Trap 2 : 0.0.0.0
(3) Agent SNMP Trap 3 : 0.0.0.0
(4) Agent SNMP Trap 4 : 0.0.0.0
(5) Agent SNMP Trap 5 : 0.0.0.0
Enter selection or type (0) to quit:
The IP address of the SNMP trap destination can be set by selecting the numbers of each SNMP trap.
Also, "SNMP Trap Community String" can be set for each IP address.
• 4. Agent SNMP Community String Table (1_1_13_4)
Sets and displays the SNMP community name.
+------------------------------------------+
|
Agent SNMP Community String Table
+------------------------------------------+
(1) SNMP Community String 1 :
(2) SNMP Community String 2 :
(3) SNMP Community String 3 :
(4) SNMP Community String 4 :
(5) SNMP Community String 5 :
Enter selection or type (0) to quit:
When using applications such as ServerView that perform communication using SNMP,
community names must be set. Set a community name for which communication can be
performed.
PRIMERGY BX600 Management Blade Hardware Guide
Agent SNMP Trap Table
|
page_1_1_13_3
|
page_1_1_13_4
75