PRIMERGY BX600 S3 Hardware Manual page 68

Chapter 5 CLI
If you connect a serial interface to a Management Blade operating in slave mode, [Welcome to
Management Blade] window is displayed and the following slave mode login screens appear.
Because settings cannot be performed from a Management Blade in slave mode, display the
master mode login screen using one of the following methods.
• Change the connection destination of the serial interface to the Management Blade operating in
master mode.
• Enter the username and password to a slave mode login screen, select "1. Change Role To
Master" in the following screen and change the operational mode of the connected Management
Blade from slave to master.
68
+------------------------------------------+
|
Slave Console Menu
+------------------------------------------+
(1) Change Role To Master
(2) Logout
Enter selection:
|
page_root