PRIMERGY BX600 S3 Hardware Manual page 130

Blade server system
Table of Contents

Advertisement

Chapter 5 CLI
Parameter
FC SWITCH Hardware Version
FC SWITCH IP Address
FC SWITCH Subnet Mask
FC SWITCH gateway
FC SWITCH FC IP Address
FC SWITCH FC Subnet Mask
FC SWITCH Name
FC SWITCH Domain ID
■ Storage Blade (1_19)
Displays various information of the Storage Blade.
+----------------------------------------+
|
+----------------------------------------+
(2)
(10) Storage Blade_10
Enter selection or type (0) to quit:
Parameter
Storage Blade_2 –
Storage Blade_10
130
Displays the hardware version.
Displays the IP Address of the management LAN interface set in the FC
Switch Blade.
Displays the subnet mask of the management LAN interface set in the FC
Switch Blade.
Displays the gateway address set in the FC Switch Blade.
Displays the IP Address set in the FC Switch Blade.
Displays the subnet mask set in the FC Switch Blade.
Displays the name set in the FC Switch Blade.
Displays the domain ID set in the FC Switch Blade.
Storage Information Table
Storage Blade_2
Displays the installed Storage Blades.
Detailed information about a specific Storage Blade can be displayed by
selecting the number of that Storage Blade.
However, the correct values may not be displayed immediately after the
Storage Blade is installed. In this case, check again after about 30 seconds
later.
Contents
|
page_1_19
Contents

Advertisement

Table of Contents
loading

Table of Contents