Table of Contents
Advertisement
Chapter 5 CLI
❑: Parameter
Parameter
Administrative URL
Switch Blade Status
Switch Blade Manufacture
Switch Blade Manufacture Date
Switch Blade Serial Number
Switch Blade Product Name
Switch Blade Model Name
Switch Blade Hardware Version
Switch Blade Firmware Version
Switch Blade MAC Address
Switch Blade IP Address
Switch Blade Subnet Mask
Switch Blade Gateway
14. Switch Blade IP Address
Setting Value
15. Switch Blade Subnet Mask
Setting Value
16. Switch Blade Gateway Setting
Value
17. Apply Network Setting
18. Switch Blade LED Control
19. Reboot Switch Blade
20. Switch Blade Period Polling
112
Setting
-
Displays the URL of the Switch Blade Web interface.
-
Displays the overall status of Switch Blade.
-
Displays the manufacturer.
-
Displays the manufacture date.
-
Displays the system serial number.
-
Displays the official name of the system.
-
Displays the model name.
-
Displays the board version.
-
Displays the firmware version.
-
Displays the MAC address of the management LAN
interface of the Switch Blade.
-
Displays the IP address of the management LAN
interface of the Switch Blade.
-
Displays the subnet mask set in the Switch Blade.
-
Displays the gateway address set in the Switch Blade.
-
Sets the IP address for the Switch Blade. Switch Blade is
set by setting apply in (17).
-
Sets the subnet mask of the Switch Blade. Switch Blade
is set by setting apply in (17).
-
Sets the Switch Blade gateway address. Switch Blade is
set by setting apply in (17).
-
Applies the values set in (14), (15) and (16) to the Switch
Blade.
Applied information is saved as a Switch Blade boot file
named "backupexi".
❑
blinking
Sets the display of the Switch Blade power supply LED
❑
off
as the Switch Blade identification function. Used to
identify the multiple Switch Blades installed in the
chassis.
• blinking
Switch Blade maintenance LEDs are blinking.
• off
Switch Blade maintenance LEDs are not controlled.
-
Reboots the Switch Blade.
"• 19. Reboot Switch Blade (1_5_1_19)" (p.113)
❑
disable
Sets with or without the period polling to the Switch
❑
enable
Blade.
Contents
Advertisement
Table of Contents
