PRIMERGY BX600 S3 Hardware Manual page 39

●
LAN Interface
Management Blade provides network service functions such as Web server, Telnet, SMTP, DNS, NTP,
SSL etc.
Network configuration settings are performed on this page.
Click [Apply LAN Configuration] and settings are reflected. It is necessary to reboot Management
Blade for some of the settings.
• Internet Protocol
IP address, subnet mask, gateway and DHCP are set on the Internet Protocol page.
Display/Parameter
Use DHCP
IP Address
Subnet Mask
Gateway
Default Route
These settings become valid after rebooting the Management Blade.
PRIMERGY BX600 Management Blade Hardware Guide
Sets whether IP address etc. are acquired using DHCP.
• enable: use DHCP.
• disable: do not use DHCP.
Set the IP address of the Management Blade (setting is required).
Default value: 192.168.1.1
Set the subnet mask (setting is required).
Default value: 255.255.255.0
Set the IP address of the gateway.
Not normally used. Set to LAN.
Description
39