PRIMERGY BX600 S3 Hardware Manual page 43

●
Console Redirection
Telnet/HTTP/SNMP filtering and KVM switching are set on the Console Redirection page.
• Keyboard/Mouse/Video Switch to Local
On the Keyboard/Mouse/Video Switch to Local page, switches which Server Blade of which slot is
to be used for the keyboard/display/mouse connected to the chassis.
• Select KVM
Since a list of installed Server Blades is displayed, select the Server Blade that wish to use the
keyboard/display/mouse connected to the chassis and click [Apply].
• IP Filter For Telnet/IP Filter For HTTP/IP Filter For SNMP
IP filtering that permits connection is performed. A maximum of 10 IP addresses can be registered.
IP addresses that permit connection are displayed in the box.
• Deleting IP filter
Select an IP address that is registered in the box to be deleted, and click [Delete] to delete it.
"255.255.255.255" is registered by default for IP Filter For Telnet and IP Filter For HTTP
as a setting that will not perform IP filtering. When performing IP filtering, delete it as
necessary.
• New Allowed IP
Registers IP filter.
Enter an IP address that permits connection and click [Add] to register. Enter the IP address
(Example: 192.168.1.2). A maximum of 10 can be registered.
PRIMERGY BX600 Management Blade Hardware Guide
43