PRIMERGY BX600 S3 Hardware Manual page 82

Chapter 5 CLI
■ System Information (1_3)
Checks / Sets the status of the blade server system and configuration information of the power supply
unit, system fan unit, temperature, etc.
+------------------------------------------+
|
+------------------------------------------+
(1) System Control Information
(2) System Power Supply
(3) System Fan
(4) System Temperature
(5) System Chassis Table
(6) System UPS
(7) System KVM
(8) System LED Control : off
(9) NIC Status Detection
(10) Turn on/off all server blades
Enter selection or type (0) to quit:
❑: Parameter
Parameter
1. System Control Information
2. System Power supply
3. System Fan
4. System Temperature
5. System Chassis Table
6. System UPS
7. System KVM
8. System LED Control
9. NIC Status Detection
82
System Information page_1_3
Setting
- Displays system information.
"● 1. System Control Information (1_3_1)" (p.83)
- Displays the state of the power supply.
"● 2. System Power Supply (1_3_2)" (p.84)
- Displays the status of the system fan.
"● 3. System Fan (1_3_3)" (p.87)
- Displays system temperature status.
"● 4. System Temperature (1_3_4)" (p.90)
- Displays the status of the chassis system fan and serial
number.
"● 5. System Chassis Table (1_3_5)" (p.93)
- Not used.
- Switches which Server Blade of which slot is to be used
for the keyboard/display/mouse connected to the chassis.
❑
on Sets the front and rear maintenance LEDs of the chassis
❑
off as the system indication LED display function.
❑
blinking • on
Maintenance LEDs are lit.
• off
Maintenance LEDs are not lit.
• blinking
Maintenance LEDs are blinking.
Important:
Even if "on" is set when "System Overall Status" is "error" or
"critical" the maintenance LED blinks.
- Sets NIC status detection.
"● 9. NIC Status Detection (1_3_9)" (p.94)
|
Contents