Software - PRIMERGY BX600 S3 Hardware Manual

Chapter 3 Software
3.1

Software

The following software is used with Management Blades.
• ServerView V3.50 or later
Blade server system status monitoring and remote operations can be performed from the ServerView
management console.
• RemoteControlService V3.06 or later
CLI operations can be performed via Telnet.
ServerView management console and RemoteControlService are stored in the PRIMERGY Startup
Disc.
For details about how to install ServerView and RemoteControlService, refer to the "Server Blade
User's Guide" and the "ServerView User's Guide".
In order to use ServerView, the following settings must be performed for Management Blade.
• Connect the management terminal to which ServerView management console has been installed
with Management Blade and Server Blade using the LAN.
• Set IP address and subnet mask in the LAN interface settings.
• Set SNMP to "Enable" and set the SNMP community name to be the same as ServerView in SNMP
settings.
• Set the IP address of the management terminal installed in the ServerView management console in
"SNMP Trap Destination".
• Set Management Agent System Name (recommended).
- "Agent Information" of Web UI ( "● System Information" (p.45))
- "9. Agent System Info" of CLI ( "■ Management Agent Information (1_1)" (p.71))
24