PRIMERGY BX600 S3 Hardware Manual page 30

Blade server system
Table of Contents

Advertisement

Chapter 4 Web UI
User Accounts
Adds new users and changes the password.
"● User Accounts" (p.46)
Deployment Table
Displays and sets the Parameters of various Server Blades that can be used with Deployment software.
"● Deployment Table" (p.47)
PPP and Modem Setting
This function is not supported.
■ Management Blade group
Displays the information of installed Management Blades.
"4.2.5 Management Blade Group" (p.48)
■ Lan Switch Blade group
Displays the information and sets the maintenance LED of installed Switch Blades.
"4.2.6 Lan Switch Blade Group" (p.49)
■ PHY Module group
Displays the information and sets the maintenance LED of installed GbE Pass-Thru Blade.
"4.2.7 PHY Module Group" (p.50)
■ FC Switch Blade group
Displays the information of installed Fibre Channel Switch Blade.
"4.2.8 FC Switch Blade Group" (p.51)
■ Adv.KVM Blade group (when PG-KVB102 is installed)
Displays the information and manages the firmware of installed advanced KVM module (PG-KVB102).
Also starts the viewer used for remote access to KVM.
"4.2.9 Adv. KVM Blade Group (when PG-KVB102 is installed)" (p.52)
■ DKVM Blade group (when PG-KVB103 is installed)
Displays the information and manages the firmware of installed advanced KVM module (PG-KVB103).
Also starts the viewer used to remotely access KVM, and starts the tools for using the remote floppy disk
drives and CD/DVD drives in the Server Blade.
"4.2.10 DKVM Blade Group (when PG-KVB103 is installed)" (p.53)
■ Server Blade group
Displays the information of installed Server Blades and Storage Blades, and performs various settings.
"4.2.11 Server Blade Group" (p.55)
30

Advertisement

Table of Contents
loading

Table of Contents