PRIMERGY BX600 S3 Hardware Manual page 3

Contents
This manual supports operation of the PRIMERGY BX600 S3 Blade Server System Unit and BX620 S4
Server Blade. For information on the chassis and Server Blade not described in this manual, refer to the
relevant manuals in the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
Remarks
■ Warning Descriptions
Various symbols are used throughout this manual. These are provided to emphasize important points for
your safety and that of others. The following are the symbols and their meanings. It is important to fully
understand these symbols before reading this manual.
Failure to observe this warning may cause serious injury or death, and/or destroy the system.
Failure to observe this warning may lead to injury, destruction of the system, or loss of data.
The following symbols are used indicate the type of warning or cautions being described.
The triangle mark emphasizes the urgency of the WARNING and CAUTION. Details are
described next to the triangle.
A barred circle (
circle.
A black circle indicates actions that must be taken. Details are described next to the black circle.
■ Symbols
Symbols used in this manual have the following meanings:
Expressions
These sections explain prohibited actions and points to note when using this device. Make sure
to read these sections.
These sections explain information needed to operate the hardware and software properly.
Make sure to read these sections.
→
This mark indicates reference pages or manuals.
■ Key Descriptions / Operations
Keys are described by their representative characters instead of their exact key face appearance, as show
below.
E.g.: [Ctrl] key, [Enter] key, [→] key, etc.
The following indicate the pressing of several keys at once:
E.g.: [Ctrl] + [F3] key, [Shift] + [↑] key, etc.
PRIMERGY BX600 Management Blade Hardware Guide
) warns against certain actions (Do Not). Details are described next to the
Meaning
3