Table of Contents
Advertisement
Chapter 5 CLI
Parameter
7. Set Management Agent Date
Time
8. Set Management Agent
Timeout (Sec)
9. Agent System Info
Management Agent
Administrative URL
11. Automatically Adjust Clock
for Daylight Saving Changes
12. Agent HTTP
13. Agent SNMP
14. Agent Telnet
15. Agent DNS
16. Agent SMTP
17. Agent NTP
18. Agent NIC Duplex Mode
19. Change Management Role
To Slave
72
Setting
-
Sets the time of the Management Blade. <Enter in the
format of month/day/year hour:minute:second>. Time is set
in 24 hour format.
❑
30– 65535
Sets the timeout value during console login. If operations
could not be performed in the specified seconds, the screen
will automatically be returned to the login screen.
If set to 0, the automatic disconnection function is disabled.
Also, the set value will be the same as the [DropTime] on
the Web UI Telnet.
-
Sets the system name, installation location and contact
address for SNMP.
-
Displays the URL to access the Web UI.
-
Not supported. Do not set.
-
Sets the HTTP agents in the Management Blade.
"● 12. Agent HTTP (1_1_12)" (p.73)
-
Sets the SNMP agents in the Management Blade.
"● 13. Agent SNMP (1_1_13)" (p.74)
-
Sets the Telnet agents in the Management Blade.
"● 14. Agent Telnet (1_1_14)" (p.76)
-
Sets DNS of the Management Blade.
"● 15. Agent DNS (1_1_15)" (p.78)
-
This item is not supported. Do not set this item.
-
Sets Network Time Protocol (NTP) of the Management
Blade.
"● 17. Agent NTP (1_1_17)" (p.78)
-
Sets NIC transmission rate of the Management Blade.
"● 18. Agent NIC Duplex Mode (1_1_18)" (p.80)
-
Forcibly changes the operational mode to slave mode if the
Management Blade is redundantly configured. Do not use
normally.
Contents
Advertisement
Table of Contents
