PRIMERGY BX600 S3 Hardware Manual page 124

Chapter 5 CLI
●
Deployment Configuration (1_12_1)
Displays and sets the Parameters for Deployment for the selected blade.
+------------------------------------------+
|
+------------------------------------------+
(-)
(-)
(-)
(-)
(7)
(8)
(11) Subnet Mask_1
(12) Subnet Mask_2
(15) Default Gateway_1
(16) Default Gateway_2
(19) Hostname
(20) Master Image Reference : **
(-)
(22) Automatic Recovery
(-)
(24) LAN status of slot
Enter selection or type (0) to quit:
Parameter
Chassis ID
Slot ID
MAC Address_1
MAC Address_2
7. IP Address_1
8. IP Address_2
11. Subnet Mask_1
12. Subnet Mask_2
15. Default Gateway_1
16. Default Gateway_2
19. Hostname
20. Master Image Reference
Status of Blade
22. Automatic Recovery
Status of Cloning
24. LAN status of slot
IP Address, Subnet Mask, Default Gateway, Hostname, MasterImageReference are automatically
set by software such as ServerView. Do not make changes unless necessary when using the
various types of Deployment software.
124
Deployment Configuration
Chassis ID : nn
Slot ID : nn
MAC Address_1 : nn:nn:nn:nn:nn:nn
MAC Address_2 : nn:nn:nn:nn:nn:nn
IP Address_1 : n.n.n.n
IP Address_2 : n.n.n.n
: n.n.n.n
: n.n.n.n
: n.n.n.n
: n.n.n.n
: **
Status of Blade : **
: **
States of Cloning : **
: **
Displays the ID of the chassis.
Displays the slot to which Server Blades are installed.
Displays the Mac Address of LAN port 1 and LAN port 2 of the Server Blade.
Displays the IP Address of LAN port 1 and LAN port 2 of the Server Blade.
Displays the subnet mask of LAN port 1 and LAN port 2 of the Server Blade.
Displays the default gateway of LAN port 1 and LAN port 2 of the Server Blade.
Sets the hostname.
Sets the master image directory.
Displays the current status of the Server Blade.
Sets whether the automatic recovery function is enabled.
Displays the overall status of cloning.
Sets the LAN status.
|
page_1_12_1
Contents