PRIMERGY BX600 S3 Hardware Manual page 133

■ 1. Console Redirect Server Blade (3_1)
Performs Server Blade console redirection.
+------------------------------------------+
|
+------------------------------------------+
(1) Console Redirect Server Blade_1
Enter selection or type (0) to quit:
A list of the installed Server Blades is displayed.
Select the Server Blade for which you wish to perform console redirection and the console redirection
screen will appear.
If the return hotkey is pressed in the console redirection screen it is possible to return to the menu screen
(For details about the return hot key, refer to " 3. Set Return Hotkey, Ctrl+ (a character)" ( p.132)).
Server Blade supports console redirection. Console redirection can only be performed for text screens.
Screen using graphic mode cannot be output.
Console redirection is performed in the serial port A of the Server Blade connected to the Management
Blade.
Using the console redirection function, management of Bios operations can be performed from the CLI
of the Management Blade.
Usually only ASCII characters can be used in the emulate console used for console redirection and
there is no arrow key, function key or [Ctrl] key. However, these are necessary to enter BIOS settings
as normal. If entered in a special way (escape sequence) the following key entries are possible.
Console Redirect Server Blade
Key
[Esc] → [1]
[F1]
[Esc] → [2]
[F2]
[Esc] → [3]
[F3]
[Esc] → [4]
[F4]
[Esc] → [5]
[F5]
[Esc] → [6]
[F6]
[Esc] → [7]
[F7]
[Esc] → [8]
[F8]
[Esc] → [9]
[F9]
[Esc] → [0]
[F10]
[Esc] → [!]
[F11]
PRIMERGY BX600 Management Blade Hardware Guide
page_3_1
Escape sequence
|
133