PRIMERGY BX600 S3 Hardware Manual page 42

Chapter 4 Web UI
●
SNMP Interface
SNMP community names and trap destinations are set on the SNMP Interface page.
• SNMP Communities
Adding and deleting of SNMP community names is performed on the SNMP Communities page.
• Community
If you input the new community name and click [New Community], the new community name is
added. A maximum of five communities can be registered.
• SNMP Trap Destination
The adding and deleting of SNMP trap destinations is performed on the SNMP Trap Destination
page.
• Destination
Enter the SNMP trap destination IP address (Example: 192.168.1.2). A maximum of five
destinations can be registered.
• Community
Specify the community name when sending a SNMP trap.
After checking the [Delete] checkbox beside the trap destination, click [Apply] and the set trap
destination can be deleted.
42
When using applications such as ServerView that perform communication using SNMP,
community names must be set. Set a community name for which communication can be
performed.