Table of Contents
Advertisement
Chapter 5 CLI
❑: Parameter
Parameter
1. Backup/restore Control
2. View Backup Configuration
3. Auto Restore Enable
• Backup/restore Control (1_11_1_1)
Sets backup and restore.
+--------------------------------------------+
|
page_1_11_1_1
+--------------------------------------------+
Switch Backup/restore Control : backup
(1) backup
(2) force-restore
(0) quit
Enter selection or type (0) to quit:
Parameter
1. backup
2. force-restore
122
Setting
-
Controls backup and restore.
"• Backup/restore Control (1_11_1_1)" (p.122)
-
Displays backed up setting information.
❑
enable
Sets whether the backed up setting information will be
❑
disable
automatically restored to the Switch Blade.
If set to "enable", automatic restore is only performed for
Switch Blades newly installed to the chassis. Restored
setting information is saved as a Switch Blade boot file
named "backup_cfg".
Backs up the current settings of the selected Switch Blade.
Force restore the backed up settings to the currently installed Switch Blade.
Force restored settings is saved as a Switch Blade boot file named
"backup_cfg".
Contents
|
Contents
Advertisement
Table of Contents
