Console Redirection - PRIMERGY BX600 S3 Hardware Manual

Chapter 5 CLI

5.4.3 Console Redirection

Server Blade and Switch Blade console redirection can be performed from the Management Blade.
Server Blade performs POST screen display and BIOS setup utility operations. Switch Blade performs
console menu display and operations.
Console redirection can only be used for one of multiple installed Server Blades or Switch Blades at
a time.
+------------------------------------------+
|
+------------------------------------------+
(1) Console Redirect Server Blade
(2) Console Redirect Switch Blade
(3) Set Return Hotkey , Ctrl+(a character) : Q
Enter selection or type (0) to quit:
Parameter
1. Console Redirect Server Blade
2. Console Redirect Switch Blade
3. Set Return Hotkey, Ctrl+ (a
character)
132
Console Redirection Table
Performs Server Blade console redirection.
"■ 1. Console Redirect Server Blade (3_1)" (p.133)
Performs Switch Blade console redirection.
"■ 2. Console Redirect Switch Blade (3_2)" (p.134)
Enter the return key "[Ctrl] + [(character to be used) key]" in the console
redirection screen enables return to the CLI screen.
The character keys used in return hotkey are set here. Default value is [Q].
When changing it enter the character to be used as the hotkey after selection.
Set the character keys to be used as [A] – [Z] excluding [M].
|
page_3
Contents