Ricoh D014 Service Manual page 1054

Specifications
LEDs
LED1 Double-Feed Detection LED
LED2 Accordion Jam Sensor (LED)
LED3 Fusing Exit Sensor (LED)
SOLENOIDS
Pick–up Solenoid:
SOL1
Tray 2
Separation Roller
SOL2
Solenoid: Tray 2
Pick–up Solenoid:
SOL3
Tray 3
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
Emits light which is reflected from the paper to
the double–feed detection sensor to test the
translucence of each sheet for double-feed
detection.
Flashes to show the user which lever to
release to remove a paper jam from the fusing
rollers.
Flashes to show the user which lever to
release to remove a paper jam from the fusing
unit.
Switches on when the tray 2 (middle tray) lift motor
switches on. This solenoid lowers the pick–up roller of
tray 3.
When tray 2 (middle tray) is selected as the paper
source, this solenoid energizes and brings the
separation roller in contact with the feed roller until the
leading edge of the sheet feeds to the paper feed
sensor.
Switches on when the tray 3 (bottom tray) lift motor
switches on. This solenoid lowers the pick–up roller of
tray 3.
7-52
CÓPIA NÃO CONTROLADA
Rev. 04/2008
SM