Honda CBR1000ST 2019 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CBR1000ST 2019
  6. Owner's manual

Honda CBR1000ST 2019 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CBR1000ST/SP
OWNER'S MANUAL
EN

Advertisement

Table of Contents
loading

Related Manuals for Honda CBR1000ST 2019

Summary of Contents for Honda CBR1000ST 2019

  • Page 1 CBR1000ST/SP OWNER’S MANUAL...
  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 3 Welcome Congratulations on your purchase of a new Country Codes Code Country Honda vehicle. Your selection of a Honda CBR1000ST makes you part of a worldwide family of European direct sales satisfied customers who appreciate Honda's Costa Rica, Guatemala, India...
  • Page 4 A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...

  • Page 5: Table Of Contents

    Contents Vehicle Safety P. 2 Operation Guide P. 22 Maintenance P. 127 Troubleshooting P. 195 Information P. 221 Specifications P. 240 Index P. 243...

  • Page 6: Vehicle Safety

    Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Image Labels............P. 7 Safety Precautions..........P. 13 Riding Precautions ..........P. 15 Accessories & Modifications......P. 20 Loading ..............

  • Page 7: Safety Guidelines

    Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual.
  • Page 8 Make Yourself Easy to See Make yourself more visible, especially at night, Keep Your Honda in Safe Condition by wearing bright reflective clothing, positioning yourself so other drivers can see you, signaling It's important to keep your vehicle properly before turning or changing lanes, and using maintained and in safe riding condition.
  • Page 9 Safety Guidelines If You are Involved in a Crash Lithium-Ion (Li-Ion) Battery Personal safety is your first priority. If you or CBR1000SP anyone else has been injured, take time to If you smell an unusual odor coming from the assess the severity of the injuries and whether it lithium-ion (li-ion) battery, park your vehicle in a is safe to continue riding.
  • Page 10 Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colourless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.

  • Page 11: Image Labels

    Image Labels Image Labels The following pages describe the label Read instructions contained in Owner's meanings. Some labels warn you of Manual carefully. potential hazards that could cause serious injury. Others provide important safety information. Read this information carefully Read instructions contained in Shop Manual and don't remove the labels.
  • Page 12 Image Labels BATTERY LABEL DANGER CBR1000ST • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protection and rubber gloves when handling the battery, or you can get burned or lose your eyesight by the battery electrolyte.
  • Page 13 Image Labels BATTERY LABEL DANGER CBR1000SP • Do not dismantle, modify or solder the main unit and battery terminals. Doing so may cause leakage, heat generation, explosion, fire or loss of vision due to leaked electrolyte. If electrolyte gets into one's eye, immediately wash the eye with plenty of water, and receive treatment from an eye specialist (ophthalmologist) as soon as possible.
  • Page 14 Image Labels RADIATOR CAP LABEL DANGER NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 1.1 kgf/cm ACCESSORIES AND LOADING WARNING LABEL WARNING ED, II ED type ACCESSORIES AND LOADING • The safety stability and handling of this vehicle may be affected by the addition of accessories and luggage.
  • Page 15 Image Labels REAR CUSHION LABEL CBR1000ST GAS FILLED Do not open. Do not heat. TYRE INFORMATION & DRIVE CHAIN LABEL Cold tyre pressure: [Driver only] Front 250 kPa (2.50 kgf/cm , 36 psi) Rear 290 kPa (2.90 kgf/cm , 42 psi) [Driver and passenger] Front 250 kPa (2.50 kgf/cm , 36 psi)
  • Page 16 Image Labels ED, II ED type SAFETY REMINDER LABEL For your protection, always wear helmet, protective apparel. FUEL LABEL ED, II ED, U, II U type U, II U type Unleaded petrol only ETHANOL up to 10 % by volume Research Octane Number (RON) 95 or higher II GS type Unleaded petrol only...

  • Page 17: Safety Precautions

    Safety Precautions Safety Precautions Helmet Safety-standard certified, high-visibility, correct Ride cautiously and keep your hands on the size for your head ● handlebars and feet on the footpegs. Must fit comfortably but securely, with the ● Keep passenger's hands onto the seat strap chin strap fastened.
  • Page 18 Safety Precautions Gloves Full-finger leather gloves with high abrasion resistance Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Jacket and Trousers Protective, highly visible, long-sleeved jacket and durable trousers for riding (or a protective suit)

  • Page 19: Riding Precautions

    Riding Precautions Riding Precautions Exercise caution on low traction surfaces. ● The tyres slip more easily on such surfaces and braking distances are Running-in Period longer. During the first 500 km (300 miles) of running, Avoid continuous braking. ● follow these guidelines to ensure your vehicle's Repeated braking, such as when future reliability and performance.
  • Page 20 Riding Precautions Anti-lock Brake System (ABS) Engine Braking This model is equipped with an Anti-lock Brake Engine braking helps slow your vehicle down System (ABS) designed to help prevent the when you release the throttle. For further brakes from locking up during hard braking. slowing action, downshift to a lower gear.
  • Page 21 P. 102 and other high-temperature parts until they Then, leave your vehicle while taking the cool down. Honda SMART Key with you. Deactivate the To reduce the likelihood of theft, always lock ● Honda SMART Key system if necessary. the handlebars ( P.
  • Page 22 Riding Precautions Refuelling and Fuel Guidelines Follow these guidelines to protect the engine, fuel system and catalytic converter: Use only unleaded petrol. ● Use recommended octane number. Using ● lower octane petrol will result in decreased engine performance. Do not use fuels containing a high ●...
  • Page 23 Torque Control may not compensate for rough Honda selectable torque control road conditions or rapid throttle operation. When the Honda selectable torque control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.

  • Page 24: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.

  • Page 25: Loading

    Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying.
  • Page 26 Parts Location CBR1000ST Tool kit/Owner's manual (P.126) Fuse box (P.220) Battery (P.150) Front brake fluid reservoir (P.164) Front brake lever (P.177) Throttle grip (P.175) Front suspension spring preload adjuster (P.179) Under cowl (P.155) Engine oil filter (P.159) Engine oil drain bolt (P.159) Engine oil fill cap (P.157)
  • Page 27 Clutch lever (P.172) Front suspension rebound damping/compression damping adjuster (P.180) (P.181) Fuel fill cap (P.124) Front seat (P.153) Rear seat (P.154) Rear suspension compression damping adjuster (P.184) Rear suspension rebound damping adjuster (P.183) Drive chain (P.168) Rear suspension spring preload adjuster (P.182) Shift lever...
  • Page 28 Parts Location (Continued) CBR1000SP Tool kit/Owner's manual (P.126) Fuse box (P.220) Battery (P.150) Front brake fluid reservoir (P.164) Front brake lever (P.177) Throttle grip (P.175) Under cowl (P.155) Engine oil filter (P.159) Engine oil drain bolt (P.159) Engine oil fill cap (P.157) Engine oil dipstick (P.157)
  • Page 29 Clutch lever (P.172) Front suspension spring preload adjuster (P.186) Fuel fill cap (P.124) Front seat (P.153) Rear seat (P.154) Drive chain (P.168) Rear suspension spring preload adjuster (P.188) Shift lever (P.117) Side stand (P.167) Coolant reserve tank (P.161)
  • Page 30 Instruments The display type consists of the following 5 patterns. • ANALOG (P.27) • DIGITAL (P.28) • BAR (P.29) • NO REV (P.30) • PRACTICE (P.31) To change the display type: (P.63) (P.75) Each display type has the SPORT mode. (P.32) The operation of the instrument is mainly explained in the ANALOG display type.
  • Page 31 (P.55) To set the clock: Tachometer (P.63) (P.84) NOTICE Do not operate the engine in the tachometer red zone. HESD (Honda Excessive engine speed can adversely affect engine life. Electronic Steering Tachometer red zone Damper) indicator (excessive engine rpm range) (P.55)
  • Page 32 NOTICE Do not operate the engine in the tachometer red zone. Pop-up information (P.52) Excessive engine speed can adversely affect engine life. ABS mode indicator HESD (Honda Electronic Steering (P.55) Damper) indicator (P.55) Low oil pressure indicator High beam indicator (P.55)
  • Page 33 Display type: BAR Low oil pressure High coolant temperature indicator (P.55) indicator (P.55) Tachometer HESD (Honda Electronic NOTICE Steering Damper) Do not operate the engine in the tachometer red zone. indicator (P.55) Excessive engine speed can adversely affect engine life.
  • Page 34 Instruments (Continued) Display type: NO REV HESD (Honda Electronic Steering Damper) indicator (P.55) Clock Low oil pressure indicator (P.55) To set the clock: High coolant temperature indicator (P.55) (P.63) (P.84) ABS mode indicator (P.55) Current riding mode Gear position indicator (P.55)
  • Page 35 Display type: PRACTICE High beam indicator Reserve fuel mode HESD (Honda Electronic Steering (P.49) Damper) indicator (P.55) Tachometer NOTICE Low oil pressure Do not operate the engine in the tachometer red zone. indicator (P.55) Excessive engine speed can adversely affect engine life.
  • Page 36 Instruments (Continued) SPORT mode display To change to the SPORT mode display: Set the “LAP” to “ON” in setting mode. (P.63) (P.75) To return to the STD mode display, set the “LAP” to “OFF” in setting mode. When switching to SPORT mode display, the following message appears on the screen for a few seconds then the lap timer is displayed.
  • Page 37 Basic Operations You can operate and set the various functions of the display using the switches on the left handlebar. PASSING/LAP switch Sel up switch switch MODE Sel left/right switch Sel down switch Continued...
  • Page 38 Instruments (Continued) When switching or setting the display, refer to the switch operation guide is displayed. Switch operation guide Type of the switch operation guide: : Press the sel up switch : Press the sel down switch : Push the of the sel left/right switch : Push the...
  • Page 39 INFO area To switch the INFO area To change the page of the INFO area, push the sel left/right switch. You can change the information items to be displayed on the pages 1-3 (INFO 1-3). You can also change the number of items to be displayed in the information area. To select the FAVORITE INFORMATION (P.63) (P.81) To change the number of information items are displayed...
  • Page 40 Instruments (Continued) The following items are types of information that can be displayed on pages 1-3 (INFO 1-3). TOTAL CBR logo (P.37) (P.41) TRIP A SHIFT POINT (P.37) (P.42) TRIP A CONS. LAP CONS. (P.38) (P.42) TRIP B LAP AVG. CONS. (P.37) (P.43) INST.
  • Page 41 Odometer [TOTAL] Tripmeter A/B [TRIP A/B] Total distance ridden. Distance ridden since the tripmeter was reset. When “------” is displayed, go to your dealer When “----.-” is displayed, go to your dealer for service. for service. To reset the tripmeter: (P.47) Continued...
  • Page 42 Instruments (Continued) Tripmeter A fuel consumption [TRIP A Current fuel mileage [INST. CONS.] CONS.] Displays the current instant fuel mileage. Displays the tripmeter A fuel consumption Display range: 0.0 to 299.9 L/100km (km/L, since the tripmeter A was reset. mile/gal or mile/L) Display range: 0.0 to 299.9 L (litres) or 0.0 to When your speed is less than 7 km/h (5 ●...
  • Page 43 Average fuel mileage [AVG. CONS.] Average speed [AVG. SPD.] Displays the average fuel mileage since the Displays the average speed since the average average fuel mileage was reset. speed was reset. Display range: 0.0 to 299.9 L/100km (km/L, Display range: 0 to 350 km/h (0 to 218 mph) mile/gal or mile/L) Initial display: “---”...
  • Page 44 Instruments (Continued) Elapsed time [ELAPSED] Numerical tachometer display [REV] Displays the engine operating time since the Displays the engine revolutions per minutes. elapsed time was reset. Display range: 0 to 16,500 r/min Display range: 00:00 to 99:59 (hours:minutes) Above 16,500 r/min (rpm): “16500” is Above 99:59: back to 00:00 displayed.
  • Page 45 Battery voltage [VOLTAGE] User letter Displays the current voltage. Displays the characters of user's choice. Date [DATE] To set the USER LETTER: (P.63) (P.82) Show the date of today. CBR logo Displays the CBR logo. Display range: Day of the week: MON to SUN DAY: 1 to 31 MONTH: JAN to DEC YEAR: 2019 to 2119...
  • Page 46 Instruments (Continued) Shift indicator set value [SHIFT POINT] Lap fuel consumption [LAP CONS.] Displays the shift indicator set value. Displays the fuel consumption of the latest Display range: 5,000 - 16,500 r/min lap. When the brightness setting of the REV Display range: 0.0 to 50.0 L (litres) or 0.0 to ●...
  • Page 47 Lap average fuel mileage [LAP AVG. Lap average speed [LAP AVG. SPD.] CONS.] Displays the average speed of the latest lap. Displays the average fuel mileage of the Display range: 0 to 350 km/h (0 to 218 mph) latest lap. When there is no lap data: “---”...
  • Page 48 Instruments (Continued) Maximum acceleration in this time Maximum right lean angle in this time [MAX ACC.] [MAX LEAN ANGLE R] Displays the maximum acceleration since the Displays the maximum lean angle of right engine was started. side since the engine was started. Display range: 0 to 1.5 G Display range: 0 to 60 deg Until detects the acceleration: “--”...
  • Page 49 Fuel consumption in this time [FUEL Average fuel mileage in this time [AVG. CONS.] CONS. Displays the fuel consumption since the Displays the average fuel mileage since the engine was started. engine was started. Display range: 0.0 to 50.0 L (litres) or 0.0 to Display range: 0.0 to 299.9 L/100km (km/L, 50.0 GAL (gallon).
  • Page 50 Instruments (Continued) Average speed in this time [AVG. SPD. Elapsed time in this time [ELAPSED Displays the engine operating time since the Displays the average speed since the engine engine was started. was started. Display range: 00:00 to 99:59 (hours:minutes) Display range: 0 to 350 km/h (0 to 218 mph).
  • Page 51 Blank display To Reset the Information Display the blank. Select the page (INFO1, 2, 3) of INFO area that contains the item you want to reset with sel left/right switch. Push and hold the of the sel left/ right switch until the RESET turns to red. If there are no items on the page that can be reset, there is no response to the operation.
  • Page 52 Instruments (Continued) EQUALIZER Displays the current lean angle of left/right side. Displays the current acceleration/ deceleration.
  • Page 53 Reserve Fuel Mode Available driving When the low fuel indicator appears the distance available driving distance and amount of remaining fuel displayed. You should refill the tank as soon as possible. Remaining fuel amount turned to the reserve fuel mode: 3.5 L (0.9 US gal, 0.7 Imp gal) Low fuel indicator Remaining fuel...
  • Page 54 Instruments (Continued) Available driving distance (Only reserve Amount of remaining fuel (Only reserve fuel mode) fuel mode) When the low fuel indicator lights, the When the low fuel indicator lights, the estimated available driving distance is estimated amount of remaining fuel can be indicated.
  • Page 55 Coolant temperature gauge ( Display range: 35°C to 132°C 34°C or less: “---” is displayed. ● Between 122°C and 131°C: ● High coolant temperature indicator lights. Coolant temperature digits flash. Above 132°C: ● High coolant temperature indicator lights. “132°C” flashes. Even if the engine coolant temperature is low, the cooling fan may start running when you ●...
  • Page 56 Instruments (Continued) Pop-up information When your vehicle has multiple pieces of In the following cases, pop-up information is information, the high-priority pop-up displayed. information display will appear. Maintenance information: If the priorities are the same, pop-up ● When the inspection time of your vehicle information display appears alternately.
  • Page 57 Maintenance Information Indication Explanation Remedy When the periodic inspection Have your vehicle inspected by time of your vehicle is your dealer. approaching. When the oil change time of your Change the engine oil. (P.159) vehicle is approaching. Helpful Information Indication Explanation Remedy When the side stand is down.
  • Page 58 Instruments (Continued) Start Mode Information Indication Explanation Remedy When the background colour is: Orange: Start mode is allowed. To use the start mode (P.63) Green: Limiting the engine (P.74) (P.119) revolution. Gray: Start mode is not allowed. Failure Information Indication Explanation Remedy CBR1000SP...
  • Page 59 If it comes on while engine is running: (P.198) ABS mode indicator [ABS 1/2] Displays the current ABS mode. HESD (Honda Electronic Steering ABS 1 is suitable for track riding. Damper) indicator ABS 2 is suitable for street riding or winding If it comes on while engine is running: roads.
  • Page 60 Instruments (Continued) Quick Shifter indicator CBR1000SP Displays the current status of the Quick Shifter. This indicator is displayed when the INFO area is in page 4 (Riding mode). Quick Shifter system is disabled. Quick Shifter upshifting is enabled. Quick Shifter downshifting is enabled. Quick Shifter upshifting and downshifting are both enabled.
  • Page 61 Lap Timer You can record lap time in the SPORT mode. (P.63) (P.75) Previous lap time Number of laps Stopwatch/difference with the best lap Continued...
  • Page 62 Instruments (Continued) You can check and clear the recorded lap data in the setting mode. (P.63) (P.83) Best icon Time stamp (Displayed when the fastest lap User letter time displayed.) Lap number Lap time Maximum vehicle speed Maximum deceleration Average speed Maximum right lean angle Fuel consumption Maximum acceleration...
  • Page 63 The lap data include the following: Lap data Display range 0 to 99 Previous lap number Exceeds 99, repeats the “99” Previous lap time 00'00"00 to 99'59"99 Stopwatch 00'00"00 to 99'59"99 Difference with the best lap -99'59"99 to 00'00"00 to +99'59"99 Maximum vehicle speed 0 to 350 km/h (0 to 218 mph) Average speed...
  • Page 64 Instruments (Continued) To record lap time, press the PASSING/LAP To Measure the Lap Time switch at each lap. Set the “LAP” to “ON” in setting mode. The stopwatch changes to display of the (P.63) (P.75) difference with the best lap. To start measuring, press the PASSING/LAP After 10 seconds, the display will return switch.
  • Page 65 To restart the measurement Previous lap time Press the PASSING/LAP switch again. The stopwatch restarts measurement. Measurement starts from the next lap. To Check or Clear the Lap Time Select the “LAP DATA” menu in the setting mode. (P.63) (P.83) Number of laps Difference with the best lap To end measurement, press and hold the...
  • Page 66 Instruments (Continued) Setting mode To shift to the setting mode Push and hold the of the sel left/right switch. To select the desired setting menu, operate the sel up switch, sel down switch, sel left/right switch on the left handle. When switching to setting mode, the clock, indicator and speed are displayed at the top of the screen.
  • Page 67 Setting flow Ordinary display MODE Setting mode RIDING MODE (P.67) SUSPENSION A MODE (P.68) SUSPENSION M MODE (P.69) QUICK SHIFTER (P.70) FUNCTION STEERING DAMPER (P.71) ABS MODE (P.72) REV INDICATOR (P.73) Push/Press START MODE REV (P.74) Push and hold/ DISPLAY Press and hold Continued...
  • Page 68 Instruments (Continued) FUNCTION DISPLAY CUSTOMIZE (P.75) MECHANIC (P.78) BRIGHTNESS (P.79) DISPLAY BACKGROUND (P.80) FAVORITE INFORMATION (P.81) USER LETTER (P.82) GENERAL Push/Press Push and hold/ Press and hold...
  • Page 69 DISPLAY LAP DATA (P.83) DATE & TIME (P.84) GENERAL UNIT (P.85) LANGUAGE (P.86) RESTORE DEFAULT (P.86) SERVICE Push/Press Push and hold/ Press and hold Continued...
  • Page 70 Instruments (Continued) GENERAL MAINTENANCE (P.88) EQUIPMENT (P.91) QS INITIALIZE (P.91) SERVICE (P.92) RACE KIT ECU (P.92) USE HISTORY Push/Press Push and hold/ Press and hold...
  • Page 71 To return to the initialize settings: RIDING MODE (P.109) Push and hold the of the sel left/ You can select the RIDING MODE. right switch. Select the "MODE 1", "MODE 2" or "MODE Reset the setting according to the switch 3"...
  • Page 72 Instruments (Continued) SUSPENSION A MODE (P.189) CBR1000SP You can change the levels of OBTi support items. Adjusting the ÖHLINS Smart EC system (P.185) Select the "A 1", "A 2" or "A 3" using the Default setting mark sel up or sel down switch.
  • Page 73 To return to the initialize settings: SUSPENSION M MODE (P.192) Push and hold the of the sel left/ CBR1000SP right switch. You can adjust the compression and Reset the setting according to the switch rebound damping of the front and rear operation guide.
  • Page 74 Instruments (Continued) Select the "UP" or "DOWN" using the QUICK SHIFTER up or sel down switch. CBR1000SP Select to the desired setting according to You can change the setting of the Quick the switch operation guide. Shifter. Return to the ordinary display or upper UP: Change the setting for upshifting.
  • Page 75 STEERING DAMPER You can change the damping level of the steering damper. The steering damping level can be selected from "SOFT", "MEDIUM" or "HARD". Each level's characteristics SOFT: More agile steering feel. (Default setting level) MEDIUM: Medium steering damping level between "SOFT"...
  • Page 76 Instruments (Continued) ABS MODE You can change the ABS mode. The ABS mode can be selected from the "ABS1 (TRACK)" or "ABS2 (SPORT)". Select the "ABS1 (TRACK)" or "ABS2 (SPORT)" using the sel up or down switch. Return to the ordinary display or upper hierarchy to complete the setting.
  • Page 77 BRIGHTNESS REV INDICATOR You can adjust the shift indicator brightness. You can change the setting of the shift Available setting range: OFF or 1 - 8 indicators. When "OFF" is selected, the shift indicator is deactivated. INTERVAL Select the "INTERVAL", "SHIFT POINT" or You can adjust the interval of lighting the "BRIGHTNESS"...
  • Page 78 Instruments (Continued) START MODE REV You can change the engine revolutions when using the start mode. To use the start mode: (P.119) Available setting range: OFF or 6,000 - 9,000 r/min (rpm) Select the engine revolutions using the sel up or sel down switch.
  • Page 79 To use a registered display setting as DISPLAY CUSTOMIZE the ordinary display: You can register 3 patterns of display settings Select the desired screen setting from the and use them as ordinary displays. "01", "02" or "03" using the sel up or You can select and combine your favorite sel down switch.
  • Page 80 Instruments (Continued) To edit and register the display: Select the "EDIT" according to the switch operation guide. Select the "DISPLAY TYPE", "REV STYLE", "LAP" or "INFO" using the sel up or sel down switch. Select to the desired setting according to the switch operation guide.
  • Page 81 To edit the display name: Display name You can edit the display name with up to 10 characters. Select the "EDIT" according to the switch operation guide. Push and hold the of the sel left/ right switch. Edit the display name. To select the character using the up switch, sel down switch, and...
  • Page 82 Instruments (Continued) MECHANIC Displays the current information of the vehicle. Displays the following information: Tachometer ● Gear position ● Throttle grip position ● Coolant temperature ● Battery voltage ● Tachometer Gear Throttle grip position position Coolant temperature Battery voltage...
  • Page 83 BRIGHTNESS You can adjust the backlight brightness to one of the eight levels or select the auto adjustment. Automatic brightness control: (P.229) The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer. Select the backlight brightness using the sel up or sel down switch.
  • Page 84 Instruments (Continued) BACKGROUND You can change the setting of the background to one of the two categories or select the auto adjustment. Automatic Background Control: (P.229) Select the "AUTO", "BLACK" or "WHITE" using the sel up or sel down switch. Return to the ordinary display or upper hierarchy to complete the setting.
  • Page 85 The number of items displayed on the INFO FAVORITE INFORMATION area changes according to the "DISPLAY You can change the types of information CUSTOMIZE" setting. displayed in "INFO1", "INFO2", and "INFO3" (P.63) (P.75) of the INFO area. If the number of items to be displayed on the INFO area is set to "NONE", "FAVORITE INFORMATION"...
  • Page 86 Instruments (Continued) USER LETTER You can edit the USER LETTER with up to 10 characters. Select the "USER LETTER". Edit the USER LETTER. To select the character using the up switch, sel down switch, and sel left/right switch. To set the character using the mode switch.
  • Page 87 To clear the recorded lap data: LAP DATA Push and hold the of the sel left/ You can check and clear the recorded lap right switch. data. Reset the lap data according to the switch If there is no lap data, "LAP DATA" cannot be operation guide.
  • Page 88 Instruments (Continued) DATE & TIME Select the "24h or 12h", "YEAR", "MONTH / DAY", "HOUR / MINUTE" or "am / pm" using sel up or sel down switch. Select to the desired setting according to the switch operation guide. When "24 / 12" is set to 24-hour indication, "am / pm"...
  • Page 89 If you want to select "L/100km" or "km/L" for UNIT fuel consumption, "km/h" must be selected in ED, II ED, II GS type the "SPEED" menu in advance. You can change the speed and mileage, and When "mph" for speed is selected, "mile/gal" fuel mileage meter units.

  • Page 90: Operation Guide

    Instruments (Continued) LANGUAGE RESTORE DEFAULT Changes the system language. The set values can be returned to the default Select the "English" or "Turkish" using the settings. sel up or sel down switch. Return to the ordinary display or upper Reset the settings according to the switch hierarchy to complete the setting.
  • Page 91 The following items are restored to their • INFO selection page default values: • ABS MODE • CBR1000SP • LANGUAGE QUICK SHIFTER • CBR1000SP SUSPENSION A/M MODE • LAP DATA • DISPLAY CUSTOMIZE • REV INDICATOR • BRIGHTNESS • BACKGROUND •...
  • Page 92 Instruments (Continued) Display range: MAINTENANCE DISTANCE: You can check the next inspection time and Next periodic inspection: change the setting of next inspection. -----, 12,875 to -99,999 km Next periodic inspection -----, (8,000 to -99,999 mile) Next engine oil change: -----, 12,875 to -99,999 km -----, (8,000 to -99,999 mile) Pass 0 km (mile): “-”...
  • Page 93 When reaching any of the following, the pop-up information is appears in the ordinary display. (P.52) “500 km” or “300 mile” from the next ● periodic inspection. “100 km” or “60 mile” from the next ● engine oil change. One month before the set month. ●...
  • Page 94 Instruments (Continued) Next inspection setting Select to the desired setting according to the switch operation guide. Select “ ” (periodic inspection ) or “ ” If you press and hold the sel up or (engine oil change) using the sel up or sel down switch while setting the sel down switch.
  • Page 95 EQUIPMENT QS INITIALIZE "EQUIPMENT" is displayed but not selectable. "QS INITIALIZE" is displayed but not selectable. Continued...
  • Page 96 Instruments (Continued) RACE KIT ECU USE HISTORY Displays a current problem with the vehicle. “RACE KIT ECU USE HISTORY” is displayed If your vehicle has problem, DTC index is but not usable. displayed. Reduce speed and have your vehicle inspected by your dealer as soon as possible. DTC indexes...
  • Page 97 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Shift indicators (P.96) Comes on briefly when the electrical system is turned on. Right Turn Signal Indicator Torque Control indicator Comes on when the electrical system is turned ●...
  • Page 98 Indicators (Continued) PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL) Comes on briefly when the electrical system is turned on. If it comes on while engine is running: (P.198) ABS (Anti-lock Brake System) indicator Comes on when the electrical system is turned on. Goes off when your speed reaches approximately 10 km/h (6 mph).
  • Page 99 Comes on when the transmission is in Neutral. Honda SMART Key indicator Comes on briefly when the electrical system is turned When the Honda SMART Key Indicator Flashes: (P.201) Steering lock indicator Comes on briefly while the steering lock is activating.
  • Page 100 Indicators (Continued) Shift Indicators The indicator colours are as follows. The shift indicators light or blink by the engine revolutions. The timing and brightness of the indicators light/blink depend on the "REV INDICATOR" White Blue setting. Setting of the Shift Indicators (P.63) (P.73) Definition: Engine revolutions...
  • Page 102 Switches Headlight dimmer switch/PASSING/LAP switch • : High beam • : Low beam • /LAP: Flashes the high beam headlight. Also use lap timer. (P.57) Horn button Hazard switch Switchable when the electrical system is on. Can be turned to off regardless of whether the electrical system is on or off.
  • Page 103 Ignition Switch (Lock) Locks steering. (P.102) Switches the electrical system on/off, locks the steering. Make sure that the Honda SMART Key is activated and enter the (P.105) (Off) Turns engine off. operating range. (P.106) Ignition switch knob (Off/Lock) (On) Turns electrical system on for starting/riding.
  • Page 104 Switches (Continued) These switches are used for operating and setting the display. (P.33) Sel up switch Sel left/right switch Sel down switch switch MODE Engine stop switch/ Start button Should normally remain in the (Run) position. In an emergency, switch to the (Stop) position to stop the engine.
  • Page 105 To retract the mechanical key Push the key into the key case while pressing the release button. ON/OFF button This button is used to activate or deactivate the Honda SMART Key system and also to confirm the activation status. (P.105) Mechanical key Continued...
  • Page 106 Switches (Continued) Steering Lock Locking Turn the ignition switch knob (Off/ Lock the steering when parking to help Lock) counterclockwise to turn off the prevent theft. electrical system. A U-shaped wheel lock or similar device is Turn the handlebars all the way to the left. also recommended.
  • Page 107 Turn and hold the ignition switch knob Unlocking (Off/Lock) counterclockwise. Make sure that the Honda SMART Key is The steering lock indicator comes on activated and enter the operating (P.105) briefly and the steering is automatically range. (P.106) locked. Push the ignition (On) switch.
  • Page 108 The system runs a two-way authentication between the vehicle and the Honda SMART Key to verify if it is the registered Honda SMART Key. The Honda SMART Key system uses low- intensity radio waves. It may affect medical...
  • Page 109 To check the Honda SMART Key ON/OFF button system status Lightly press the ON/OFF button. The LED of the Honda SMART Key will show the status. When the LED of the Honda SMART Key is: Green: Honda SMART Key system (activation) authentication can be performed.
  • Page 110 (Continued) Operating Range The system can be operated when the The Honda SMART Key system uses low- Honda SMART Key is within the shaded area intensity radio waves. Therefore the shown in the illustration. operating range may become wider or Placing the Honda SMART Key on the fuel tank may cause communication failure.
  • Page 111 Anyone can operate the ignition switch and Anyone in possession of the Honda SMART start the engine if your Honda SMART Key is Key can perform the following operations if within operating range of your vehicle, even the Honda SMART Key is within operating...
  • Page 112 (P.102) Operating the Ignition Switch To Activate the Electrical System Make sure that the Honda SMART Key is activated and enter the operating range for To turn Off the Electrical System the vehicle. (P.105) Push the ignition (On) switch.
  • Page 113 Riding mode You can change the riding mode. Current riding mode The riding mode consists of the following parameters. T value P: Engine output level P value T: Torque control level W: Wheelie control level W value EB: Engine brake level CBR1000SP S mode S: Suspension mode...
  • Page 114 Riding mode (Continued) Riding mode has three modes. Available riding mode: MODE 1, MODE 2 or MODE 3. Each value can be changed. CBR1000SP Setting of S mode can be changed. Initial setting S mode Riding modes P value T value W value EB value CBR1000SP...
  • Page 115 P value (Engine output level) W value (Wheelie control level) P value has five setting levels. W value has four setting levels. Available setting range: 1 to 5 Available setting range: 1 to 3 Level 1 has the most power. Level 1 is the minimum Wheelie Control level.
  • Page 116 Riding mode (Continued) Selecting the riding mode The riding mode changes each time the switch is pressed. MODE When the riding mode is changed the P, T, W, and EB values are appeared briefly in the INFO area. CBR1000SP Current riding mode The S value also appears.
  • Page 117 Setting the riding mode Select the riding mode you want to set. CBR1000ST (P.112) To change the type of parameter You can change the P, T, W and EB values. displayed in FAVORITE CBR1000SP Press and hold the sel up switch or You can change the P, T, W, EB values and S sel down switch to select the mode.
  • Page 118 Riding mode (Continued) Sel up switch Sel down switch Press and hold the sel up switch CBR1000SP Press and hold the sel down switch Press the sel up switch Press the sel down switch...
  • Page 119 10 seconds before trying is cold or warm. to start the engine again to recover battery voltage. This vehicle is equipped with a Honda • Extended fast idling and revving the engine can SMART Key system. Always keep Honda damage the engine, and the exhaust system.
  • Page 120 Starting the Engine (Continued) If the engine does not start: Open the throttle fully and press the start button for 5 seconds. Repeat the normal starting procedure. If the engine starts, open the throttle slightly if idling is unstable. If the engine does not start, wait 10 seconds before trying steps a &...
  • Page 121 Shifting Gears Your vehicle transmission has 6 forward If you put the vehicle in gear with the side gears in a one-down, five-up shift pattern. stand down, the engine will shut off. Continued...
  • Page 122 Shifting Gears (Continued) Quick Shifter The Quick Shifter can be individually ● turned ON (active) and OFF (deactivate), CBR1000SP This system enables very quick up and down also the shift pedal load level for shifting without clutch and throttle activating the Quick Shifter can be operations.
  • Page 123 Start Mode Your vehicle controls the engine torque to To set the start mode support optimal acceleration from standstill. Start the engine. (P.115) Stop the vehicle completely. Set to the SPORT mode. (P.63) (P.75) WARNING Press and hold the sel up or Using the start mode on public roads down switch and PASSING/LAP switch until can lead to a crash in which you, other...
  • Page 124 Start Mode (Continued) In the following cases, pop-up information of Start the vehicle with the throttle fully open. The engine revolution is limited by the "START MODE" with gray background set value of "START MODE REV", the appears, system is not allowed. pop-up information changes from The vehicle is not at standstill.
  • Page 125 After the vehicle has started, the system is deactivated under one of the following conditions. Reach the 3rd gear. ● Reach the engine revolution of the shift ● indicator limit value in 1st gear. (P.63) (P.73) Reach the lean angle is more than 20 ●...
  • Page 126 Emergency Stop Signal Emergency stop signal activates when the The emergency stop signal stops operating system detects hard braking about when: 50 km/h (31 mph) or above to alert drivers You release the brakes. ● behind you about sudden braking by rapidly The ABS is deactivated.
  • Page 127 The emergency stop signal is not a system that can prevent a possible rear-end collision caused by your hard braking. It is always recommended to avoid hard braking unless it is absolutely necessary. The emergency stop signal does not activate with the hazard switch pressed in.
  • Page 128 Refuelling Opening the Fuel Fill Cap Fuel fill cap Lock cover Open the lock cover, insert the mechanical Level plate key, and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap After refuelling, push the fuel fill cap closed until it locks.
  • Page 129 Storage Equipment Helmet Holder WARNING The helmet holders are located underside of Riding with a helmet attached to the the rear seat. holder can interfere with your ability to safely operate the vehicle and could Helmet holder lead to a crash in which you can be seriously hurt or killed.
  • Page 130 Storage Equipment (Continued) Tool kit/Owner's manual Removing the Rear Seat (P.154) The tool kit is located under the rear seat. The owner's manual is stored in the tool bag. Tool kit Owner's manual...

  • Page 131: Maintenance

    Rear Seat ............. P. 154 Adjusting the ÖHLINS Smart EC System..P. 185 Under Cowl............P. 155 Other Replacement......... P. 193 Engine Oil ............P. 157 Replacing the Honda SMART Key Battery .. P. 193 Coolant .............. P. 161 Brakes..............P. 164...

  • Page 132: Importance Of Maintenance

    Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your vehicle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required. performance, avoid breakdowns, and reduce air We cannot warn you of every conceivable pollution.

  • Page 133: Maintenance Schedule

    Maintenance work should be performed in new owner. accordance with Honda's standards and specifications by properly trained and equipped Honda recommends that your dealer should technicians. Your dealer meets all of these road test your vehicle after each periodic requirements. Keep an accurate record of maintenance is carried out.
  • Page 134 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 135 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 134 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years Brake Pads Wear Brake System Brakelight Switch...
  • Page 136 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 137 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 134 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years Brake Pads Wear Brake System Brakelight Switch...

  • Page 138: Maintenance Fundamentals

    Maintenance Fundamentals Drive chain - Check condition and slack, Pre-ride Inspection ● adjust and lubricate if necessary. P. 168 To ensure safety, it is your responsibility to Brakes - Check operation; ● perform a pre-ride inspection and make sure Front and Rear: check brake fluid level and that any problem you find is corrected.
  • Page 139 Maintenance Fundamentals Replacing Parts Colour label Always use Honda Genuine Parts or their equivalents to ensure reliability and safety. Except II GS type When ordering coloured components, specify the model name, colour, and code mentioned on the colour label. The colour label is attached on the under the rear seat.
  • Page 140 Maintenance Fundamentals Battery This symbol on the battery means that this product must not be treated as CBR1000SP household waste. Your vehicle has a lithium-ion (li-ion) battery. P. 138 NOTICE An improperly disposed of battery can be CBR1000ST Your vehicle has a maintenance-free type harmful to the environment and human health.
  • Page 141 Maintenance Fundamentals What to do in an emergency WARNING If any of the following occur, immediately see The battery gives off explosive your doctor. hydrogen gas during normal operation. Electrolyte splashes into your eyes: ● Wash your eyes repeatedly with cool water for at least 15 minutes.
  • Page 142 Always replace the battery with another maintenance-free battery of the same type. NOTICE Installing non-Honda electrical accessories can overload the electrical system, discharging the battery and possibly damaging the system.
  • Page 143 Maintenance Fundamentals What to do in an emergency WARNING If any of the following occurs, immediately see The battery contains flammable organic your doctor. solvent as electrolyte. Electrolyte splashes into your eyes: ● Wash your eyes repeatedly with cool water for at 15 minutes. Using water You can be burned or seriously injured under pressure can damage your eyes.
  • Page 144 NOTICE If the terminals are heavily corroded, clean Installing non-Honda electrical accessories can and polish the terminals with a wire brush or overload the electrical system, discharging the sandpaper. Wear safety glasses.
  • Page 145 Selecting the Engine Oil Blown fuse For recommended engine oil, see “Specifications.” P. 241 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: NOTICE JASO T 903 standard : MA ●...
  • Page 146 The API classification specifies the quality and Recommended brake fluid: performance rating of engine oils. Use SG or Honda DOT 4 Brake Fluid or equivalent higher oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the Drive Chain circular API service symbol.
  • Page 147 Maintenance Fundamentals If the chain does not move smoothly, makes Cleaning and Lubricating strange noises, has damaged rollers, has loose After inspecting the slack, clean the chain and pins, has missing O-rings, or kinks, have the sprockets while rotating the rear wheel. Use a dry chain inspected by your dealer.
  • Page 148 Do not use a steam cleaner, a high pressure Except India, Nepal, Hong Kong, Macao cleaner, a wire brush, volatile solvent such as Pro Honda HP Coolant is a pre-mixed solution petrol and benzene, abrasive cleaner, chain of antifreeze and distilled water.
  • Page 149 Maintenance Fundamentals Inspecting for Damage Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for Visually inspect your tyres and use an air cuts, slits, or cracks that pressure gauge to measure the air pressure at exposes fabric or least once a month or any time you think the cords, or nails or other tyres look low.
  • Page 150 Maintenance Fundamentals Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a For safe riding, you should replace the tyres crash in which you can be seriously hurt when the minimum tread depth is reached.
  • Page 151 Always use the size and type of tyres Have the wheel balanced with Honda ● recommended in this owner's manual. Genuine balance weights or equivalent after the tyre is installed.
  • Page 152 Maintenance Fundamentals Air Cleaner II GS type This vehicle is equipped with a viscous type air cleaner element. Air blow cleaning or any other cleaning can degrade the viscous element performance and cause the intake of dust. Do not perform the maintenance. Should be serviced by your dealer.

  • Page 153: Tool

    Tool The tool kit is stored under the rear seat. P. 154 You can perform some roadside repairs, minor adjustments and parts replacement with the provided tools. 3 mm Hex wrench ● 5 mm Hex wrench ●...

  • Page 154: Removing & Installing Body Components

    Removing & Installing Body Components Battery CBR1000SP CBR1000ST Positive terminal Negative terminal Negative terminal Positive terminal Rubber strap Battery Rubber strap Battery...
  • Page 155 Removing & Installing Body Components Battery Removal Installation Make sure the electrical system is turned off. Install the parts in the reverse order of Remove the front seat. P. 153 removal. Always connect the positive + Unhook the rubber strap. terminal first.

  • Page 156: Clip

    Removing & Installing Body Components Clip Clip Installation Removal Push the bottom of the centre pin. Insert the clip into the hole. Press down on the centre pin to lock the Press down on the centre pin to release clip. the lock.

  • Page 157: Front Seat

    Removing & Installing Body Components Front Seat Front Seat Removal Remove the mounting bolts and washers, Mounting bolts Washer and then pull the front seat back and up. Installation Washer Install the front seat while inserting the tab into the recess. Install the washers and mounting bolts.

  • Page 158: Rear Seat

    Removing & Installing Body Components Rear Seat Rear Seat Removal Insert the mechanical key into the seat Rear seat lock. Turn the mechanical key clockwise, then pull the rear seat forward and up. Installation Recess Insert the tab into the recess. Push down on the front of the rear seat.

  • Page 159: Under Cowl

    Removing & Installing Body Components Under Cowl Under Cowl Under cowl bolt B Under cowl bolts A Under cowl bolts A Clip Under cowl bolt B Clip screw Under cowl Removal Under Remove the clips. P. 152 cowl screw Remove the pan screws and under cowl bolts A and B.
  • Page 160 Removing & Installing Body Components Under Cowl Installation Install the under cowl using reverse of the removal procedure. Route the tubes through the opening of the under cowl. Install and tighten the under cowl bolts A and B securely. Torque: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft) Install and tighten the pan screws securely.

  • Page 161: Engine Oil

    Engine Oil Checking the Engine Oil Oil fill cap If the engine is cold, idle the engine for 3 to 5 minutes. Turn off the electrical system to stop the engine, and wait for 2 to 3 minutes. Upper level Place your vehicle in an upright position on a firm, level surface.
  • Page 162 Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil. oil can cause damage to your engine. Do not mix P.
  • Page 163 Changing the oil and filter requires special tools. We recommend that you have your Drain bolt vehicle serviced by your dealer. Use a new Honda Genuine oil filter or equivalent specified for your model. NOTICE Using the wrong oil filter can result in serious damage to the engine.
  • Page 164 Engine Oil Changing Engine Oil & Filter Remove the oil filter with a filter wrench Install the new oil filter and tighten. and let the remaining oil drain out. Make Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft) sure the prior seal is not stuck to the engine.

  • Page 165: Coolant

    Coolant Checking the Coolant UPPER level Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between the UPPER level and LOWER level marks LOWER level Reserve tank...
  • Page 166 Coolant Adding Coolant Adding Coolant Stopper Inner Panel If the coolant level is below the LOWER level mark, add the recommended coolant P. 144) until the level reaches the UPPER level mark. Add fluid only from the reserve tank cap and Bolt do not remove the radiator cap.
  • Page 167 Coolant Changing Coolant Remove the reserve tank cap and add WARNING fluid while monitoring the coolant level. Removing the radiator cap while the Do not overfill above the UPPER level engine is hot can cause the coolant to mark. spray out, potentially scalding you. Make sure no foreign objects enter the reserve tank opening.

  • Page 168: Brakes

    Brakes Checking Brake Fluid horizontal and that the fluid level is between the MIN and MAX marks. Place your vehicle in an upright position If the brake fluid level in either reservoir is on a firm, level surface. below the LOWER level mark or MIN mark or Except CBR1000SP Front the brake lever and pedal freeplay becomes Check that the brake fluid reservoir is...
  • Page 169 Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Always inspect both left and right Check the condition of the brake pad wear brake calipers. indicators. Inspect the brake pads from the Rear The pads need to be replaced if a brake pad underside of the rear of the vehicle.
  • Page 170 Brakes Adjusting the Brakelight Switch Adjusting the Brakelight Switch Check the operation of the brakelight switch. Hold the brakelight switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 171: Side Stand

    Side Stand Checking the Side Stand Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand. If the engine doesn't stop, have your vehicle inspected by your dealer.

  • Page 172: Drive Chain

    Drive Chain Inspecting the Drive Chain Slack Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding. Have the chain inspected by your dealer. Shift the transmission to Neutral.
  • Page 173 Drive Chain Adjusting the Drive Chain Slack Adjusting the Drive Chain Slack Lock nut Adjusting plate Adjusting the chain requires special tools. Adjusting bolt Have the drive chain slack adjusted by your dealer. When adjusting the drive chain slack, be careful not to damage the wheel speed sensor and pulser ring.
  • Page 174 Drive Chain Adjusting the Drive Chain Slack Turn both adjusting bolts an equal Tighten the rear axle nut. number of turns until the correct drive Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft) chain slack is obtained. Turn the adjusting bolts counterclockwise to tighten the Hold the adjusting bolts and tighten the chain.
  • Page 175 Drive Chain Checking the Drive Chain Slider Checking the Drive Chain Slider Checking the Drive Chain Wear Check the chain wear label when adjusting Check the condition of the drive chain slider. the drive chain. If the rear edge of the The drive chain slider will need to be adjusting plate enters the red zone on the replaced if the chain slider is worn to the...

  • Page 176: Clutch

    Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay. commercially available cable lubricant to Freeplay at the clutch lever: prevent premature wear and corrosion.
  • Page 177 Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper clutch cable adjuster Freeplay Upper Adjustment – Attempt adjustment with the upper clutch cable adjuster first. Turn the clutch cable adjuster until the freeplay is 10 - 20 mm (0.4 - 0.8 in). Continued...
  • Page 178 Clutch Adjusting the Clutch Lever Freeplay Lower Adjustment Lower lock nut Adjusting nut If the upper clutch cable adjuster is threaded out near its limit, or the correct freeplay cannot be obtained, attempt adjustment with the lower clutch cable adjusting nut. Turn the upper clutch cable adjuster all the way in (to provide maximum freeplay).

  • Page 179: Throttle

    Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, close automatically, have the vehicle inspected by your dealer. Throttle...

  • Page 180: Other Adjustments

    Other Adjustments Adjusting the Headlight Aim You can adjust vertical aim of the headlight for proper alignment. Turn the knob in or out as necessary. Obey local laws and regulations. Left side Right side Lower Raise Raise Lower...

  • Page 181: Adjusting The Brake Lever

    Other Adjustments Adjusting the Brake Lever Adjusting the Brake Lever CBR1000SP Turn the adjuster clockwise while pushing the lever forward to widen the distance. Turn the You can adjust the distance between the tip adjuster counterclockwise while pushing the of the brake lever and handle grip. lever forward to narrow the distance.
  • Page 182 Other Adjustments Adjusting the Brake Lever After adjustment, check that the lever operates correctly before riding. NOTICE Do not turn the adjuster beyond its natural limit.

  • Page 183: Adjusting The Front Suspension

    Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload CBR1000ST You can adjust the spring preload by the adjuster to suit the load or the road surface. The spring preload adjuster has 15 turns. Adjuster Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease NOTICE spring preload (soft).
  • Page 184 Other Adjustments Adjusting the Front Suspension Rebound Damping CBR1000ST You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool. The TEN adjuster has 5 1/2 turns. TEN adjuster Turn clockwise to increase rebound damping (hard), or turn counterclockwise to decrease...
  • Page 185 Other Adjustments Adjusting the Front Suspension Compression Damping CBR1000ST You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool. COM adjuster The COM adjuster has 7 turns. Turn clockwise to increase compression damping (hard), or turn counterclockwise to decrease compression damping (soft).

  • Page 186: Adjusting The Rear Suspension

    Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension 3 4 5 6 7 8 Spring Preload CBR1000ST You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool. Adjuster The preload adjuster has 10 positions.
  • Page 187 Other Adjustments Adjusting the Rear Suspension Rebound Damping CBR1000ST You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool. The TEN adjuster has 4 turns. TEN adjuster Turn clockwise to increase rebound damping (hard), or turn counterclockwise to decrease...
  • Page 188 Other Adjustments Adjusting the Rear Suspension Compression Damping CBR1000ST You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool. The COM adjuster has 4 1/2 turns. COM adjuster Turn clockwise to increase compression damping (hard), or turn counterclockwise to...

  • Page 189: Adjusting The Öhlins Smart Ec System

    Other Adjustments Adjusting the ÖHLINS Smart EC System Adjusting the ÖHLINS Smart EC SCU constantly determines riding conditions from vehicle information. As a result, this System system provides the optimum rebound and compression damping characteristics. CBR1000SP This model is equipped with the ÖHLINS The system continually adjusts compression Smart EC system.
  • Page 190 Other Adjustments Adjusting the ÖHLINS Smart EC System Front Spring Preload Make sure the electrical system is turned off. You can adjust the spring preload by the Slide the connector cover, and then adjuster to suit the load or the road surface. disconnect the front suspension connector from the coupler clip.
  • Page 191 Other Adjustments Adjusting the ÖHLINS Smart EC System Turn clockwise to increase spring preload Connect the front suspension connector (hard), or turn counterclockwise to to the coupler clip and then install the decrease spring preload (soft). connector cover. The standard position is the 2 turns from the full soft position.
  • Page 192 Other Adjustments Adjusting the ÖHLINS Smart EC System Rear Spring Preload You can adjust the spring preload by the Adjuster adjuster knob to suit the load or the road surface. Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease spring preload (soft).
  • Page 193 Other Adjustments Adjusting the ÖHLINS Smart EC System Damping Adjustment Defaults of A-mode can be adjusted using the ÖHLINS Objective Based Tuning interface You can select A-mode which automatically (OBTi). adjusts damping according to the riding “OBTi” provides the interface where the rider situation and MANUAL mode which allows can adjust the settings in order to enhance damping to be set at a fixed level.
  • Page 194 Other Adjustments Adjusting the ÖHLINS Smart EC System FRONT/REAR: BRAKE: By adjusting the front and rear firmness By adjusting the brake support objective it is objective, it is possible to increase(+) or possible to increase (+) or decrease (-) the decrease(-) the front and rear suspension pitching resistance during initial braking.
  • Page 195 Other Adjustments Adjusting the ÖHLINS Smart EC System ACC (TRACK only): CORNER (TRACK only): By adjusting the acceleration objective it is By adjusting the corner objective it is possible possible to increase (+) or decrease (-) the to increase (+) or decrease (-) the agile pitching resistance during accelerating.
  • Page 196 Other Adjustments Adjusting the ÖHLINS Smart EC System MANUAL mode In MANUAL mode, the following damping The suspension setting can be fixed at a levels can be adjusted as desired: certain value on compression and rebound FR COM: Compression damping for front damping of the front and rear suspensions.

  • Page 197: Other Replacement

    Other Replacement Replacing the Honda SMART With the emblem upward, separate the Honda SMART Key by inserting a coin or Key Battery a flat head screwdriver covered with a protective cloth into the slit. If the Honda SMART Key indicator flashes 5...
  • Page 198 Other Replacement Replacing the Honda SMART Key Battery Replace the old battery with a new one WARNING with the positive + side facing up. Chemical Burn Hazard: do not Assemble the parts in the reverse order of swallow battery. disassembly.

  • Page 199: Troubleshooting

    ABS (Anti-lock Brake System) Indicator ..P. 199 HESD (Honda Electronic Steering Damper) Indicator ............P. 199 Torque Control Indicator......... P. 200 Honda SMART Key Indicator......P. 201 When the Honda SMART Key System Does Not Operate Properly........... P. 202...

  • Page 200: Engine Will Not Start

    Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 115 sequence.

  • Page 201: Overheating (High Coolant Temperature Indicator Is On)

    Overheating (High coolant temperature indicator is on) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the electrical system off. High coolant temperature indicator If the fan is not operating: ● Suspect a fault.

  • Page 202: Warning Indicators On Or Flashing

    Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious problem. Have your vehicle inspected by If the low oil pressure indicator comes on, your dealer.

  • Page 203: Abs (Anti-Lock Brake System) Indicator

    30 km/h (19 mph). Indicator comes on or starts flashing while ● riding. Indicator does not come on when the HESD (Honda Electronic ● electrical system is turned on. Steering Damper) Indicator Indicator does not go off at speeds above ●...

  • Page 204: Torque Control Indicator

    Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator Even when the Torque Control indicator is on, your vehicle will have normal riding ability without Torque Control function. If the indicator operates in one of the When the indicator comes on while the following ways, you may have a serious Torque Control is in operation, you will problem with the Torque Control.

  • Page 205: Honda Smart Key Indicator

    When the Honda SMART Key You may not be able to turn off the electrical indicator flashes 5 times system when losing the Honda SMART Key Replacing the Honda SMART Key while riding, or if the battery is low, or Battery P.

  • Page 206: When The Honda Smart Key System Does Not Operate Properly

    When the Honda SMART Key System Does Not Operate Properly When the Honda SMART Key system does Check that there is no communication ● not work properly, perform the following. failure in the Honda SMART Key system. Check that the Honda SMART Key system The Honda SMART Key system uses low- ●...
  • Page 207 When the Honda SMART Key System Does Not Operate Properly Check that a registered Honda SMART Check the battery condition and battery ● ● Key is used. lead in your vehicle. Use a registered Honda SMART Key. Check the battery and battery terminals. If The Honda SMART Key system cannot be the battery is weak, contact your dealer.

  • Page 208: Activating The Electrical System In An Emergency

    The mechanical key can be used to activate Check the ID number on the ID tag. the electrical system when the electric system cannot be turned on because the Honda SMART Key battery becomes weak or dead. Set up to ID number input mode Remove the front seat using a 5 mm Hex wrench provided in the tool kit.
  • Page 209 Activating the Electrical System in an Emergency ID number input While inputting the ID number, if the button is not pressed for about 60 seconds, the You can input your ID number by pushing inputted ID number is cancelled and the the ignition (On) switch and Turn the system returns to the state before removing ignition switch knob...
  • Page 210 Activating the Electrical System in an Emergency Example: To input “0”, turn the ignition switch knob To input “1”, push the ignition (On) ● ● (Off/Lock) counterclockwise without switch once, and then turn the ignition pushing the ignition (On) switch, and switch knob (Off/Lock) then input next digit.
  • Page 211 Activating the Electrical System in an Emergency You can turn off the engine and electrical ID number input success After the last digit of the ID number is system and also lock the steering using the inputted, ID number is authenticated, the ignition switch.
  • Page 212 Activating the Electrical System in an Emergency ID number input failure ID number input cancel If the ID number is not authenticated after If you input the wrong number, you can inputting, the steering lock indicator goes off. cancel ID number input by not operating the The steering cannot be unlocked and the switch for about 60 seconds (the steering electrical system will not activate.

  • Page 213: Tyre Puncture

    Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tyre repair can be risky. If the temporary performed by your dealer. repair fails, you can crash and be After an emergency repair, always have the seriously injured or killed.
  • Page 214 Tyre Puncture Removing Wheels When removing and installing the wheel, be CBR1000ST careful not to damage the wheel speed Harness guide Mounting sensor and pulser ring. bolts Wheel speed sensor Front Wheel Removal Place your vehicle on a firm, level surface. Tape or cloth Cover the both side of the front wheel and brake caliper with protective tape or cloth.
  • Page 215 Tyre Puncture Removing Wheels On the right side, remove the mounting CBR1000ST bolts and remove the brake caliper. Left side collar On the left side, remove the mounting bolts and remove the brake caliper. Support the brake caliper assembly so that it doesn't hang from the brake hose.
  • Page 216 Tyre Puncture Removing Wheels Loosen the right axle pinch bolts. CBR1000SP On the right side, withdraw the front axle Front axle shaft Right side collar shaft, and remove the side collars and wheel. CBR1000ST Front axle shaft Right side collar Axle pinch bolts Axle pinch bolts...
  • Page 217 Tyre Puncture Removing Wheels Installation CBR1000SP Attach the side collars to the wheel. On the right side, place the wheel Surface of fork leg between the fork legs and insert the lightly greased front axle shaft to the end, through the right fork leg and wheel hub. Align the end of the front axle shaft with the surface of the fork leg.
  • Page 218 Tyre Puncture Removing Wheels Install the left brake caliper and tighten Retighten the right axle pinch bolts. the mounting bolts. Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft). Torque: 40 N·m (4.1 kgf·m, 30 lbf·ft). Raise the front wheel off the ground Install the right brake caliper and tighten again, and check that the wheel rotates the mounting bolts.
  • Page 219 Tyre Puncture Removing Wheels Rear Wheel Remove the drive chain from the driven sprocket by pushing the rear wheel Removal forward. Place your vehicle on a firm, level surface. Remove the rear axle shaft and adjusting Support your vehicle securely and raise plates.
  • Page 220 Tyre Puncture Removing Wheels Remove the brake caliper bracket, rear Installation wheel and side collars. To install the rear wheel, reverse the Support the brake caliper assembly so removal procedure. that it doesn’t hang from the brake Take care to prevent the brake caliper hose.
  • Page 221 Tyre Puncture Removing Wheels Make sure that the lug on the brake Adjust the drive chain. P. 169 caliper bracket is positioned in the slot on Install and tighten the rear axle nut. the swingarm. Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft). Slot After installing the wheel, apply the brake pedal several times, then check if the...

  • Page 222: Electrical Trouble

    Electrical Trouble Battery Goes Dead CBR1000SP Battery charging is needed. A battery charger recommended by your CBR1000ST Charge the battery using a motorcycle lithium-ion (li-ion) battery manufacturer is battery charger. needed for battery charging. Remove the battery from the vehicle before Contact your dealer before charging the charging.

  • Page 223: Burned-Out Light Bulb

    Electrical Trouble Burned-out Light Bulb Burned-out Light Bulb License plate light Brakelight/ Taillight All light bulbs on the vehicle are LEDs. If there is an LED which is not turned on, see your dealer for servicing. Front turn signals/Position lights Rear turn signals Headlights...

  • Page 224: Blown Fuse

    Electrical Trouble Blown Fuse Blown Fuse Fuse puller Before handling fuses, see “Inspecting and Replacing Fuses.” P. 141 Spare fuses Fuse Box Fuses Fuse box cover Remove the front seat. P. 153 Remove the fuse box cover. Pull the main fuse and other fuses out one by one with the fuse puller furnished Main fuse in reverse side of the fuse box cover and...

  • Page 225: Information

    Information Service Diagnostic Recorders....... P. 222 Keys..............P. 223 Instruments, Controls, & Other Features... P. 227 Caring for Your Vehicle........P. 229 Storing Your Vehicle........P. 234 Transporting Your Vehicle ......P. 235 You & the Environment ......... P. 235 Serial Numbers ..........

  • Page 226: Service Diagnostic Recorders

    However this data may be accessed by Honda, its authorised dealers and authorised repairers, employees, representatives and contractors only for the purpose of the technical diagnosis,...

  • Page 227: Keys

    Do not store near any magnetized products ● such as a magnetized key chain. The ID number of the Honda SMART Key is on Always keep the Honda SMART Key away ● the ID tag. You can also unlock the steering (if it...
  • Page 228 Keys If fuel, wax, or grease adhere to the Honda To get an additional Honda SMART Key, take ● SMART Key, wipe it off immediately to avoid the Honda SMART Key and the vehicle to your cracking or warping. dealer.
  • Page 229 YANYOL SOKAK. NO:1 41420, CAYIROVA / KOCAELI / TURKEY The declaration of conformity to RE Directive is Hereby, Honda Lock Mfg. Co., Ltd. declares that provided to the owner at the time of purchase. the radio equipment type HLSS-5 is in The declaration of conformity should be kept at compliance with Directive 2014/53/EU.
  • Page 230 Keys Bahrain only Vietnam only Manufacturer Honda Lock Mfg. Co., Ltd. Model name HLSS-5...

  • Page 231: Instruments, Controls, & Other Features

    Instruments, Controls, & Other Features Instruments, Controls, & Odometer Other Features The display locks at 999,999 when the read-out exceeds 999,999. Ignition Switch Leaving the electrical system on with the engine Tripmeter stopped will drain the battery. The tripmeters return to 0.0 when each read- out exceeds 9,999.9.
  • Page 232 HESD Throttle by Wire System The Honda Electronic Steering Damper (HESD) automatically controls the steering damper This model is equipped with a Throttle by Wire characteristics in accordance with vehicle speed System.

  • Page 233: Caring For Your Vehicle

    The backlight brightness of the meter will be Frequent cleaning and polishing is important to controlled automatically when “AUTO” is ensure the life of your Honda. A clean vehicle selected on the brightness setting. makes it easier to spot potential problems.
  • Page 234 Caring for Your Vehicle Thoroughly rinse your vehicle with plenty of Washing Precautions clean water and dry with a soft, clean cloth. Follow these guidelines when washing: After the vehicle dries, lubricate any moving Do not use high-pressure washers: ● parts.
  • Page 235 Caring for Your Vehicle Do not direct water at the air cleaner: Do not use wax or polishing compounds on ● ● Water in the air cleaner can prevent the mat painted surface: engine from starting. Use a soft cloth or sponge, plenty of Do not direct water near the headlight: water, and a mild detergent to clean mat ●...
  • Page 236 Caring for Your Vehicle Aluminium Components Windscreen Aluminium will corrode from contact with dirt, Using plenty of water, clean the windscreen with mud, or road salt. Clean aluminium parts a soft cloth or sponge. (Avoid using detergents regularly and follow these guidelines to avoid or any kind of chemical cleaner on the scratches: windscreen.) Dry with a soft, clean cloth.
  • Page 237 Caring for Your Vehicle Exhaust Pipe and Muffler Coated area To remove mud or dust, use a wet sponge and The exhaust pipe and muffler are titanium and a mild detergent, then rinse well with clean stainless steel but may become stained by mud water.

  • Page 238: Storing Your Vehicle

    Storing Your Vehicle Storing Your Vehicle Remove the battery ( P. 150) to prevent ● discharge. Fully charge the battery and then If you store your vehicle outdoors, you should place it in a shaded, well-ventilated area. consider using a full-body cover. If you leave the battery in place, If you won't be riding for an extended period, disconnect the negative - terminal to...

  • Page 239: Transporting Your Vehicle

    Transporting Your Vehicle Transporting Your Vehicle You & the Environment If your vehicle needs to be transported, it Owning and riding a vehicle can be enjoyable, should be carried on a motorcycle trailer or a but you must do your part to protect the flatbed truck or trailer that has a loading ramp environment.
  • Page 240 You & the Environment Recycle Wastes Put oil and other toxic wastes in approved containers and take them to a recycling centre. Call your local or state office of public works or environmental services to find a recycling centre in your area, and to get instructions on how to dispose of non-recyclable wastes.

  • Page 241: Serial Numbers

    Serial Numbers Serial Numbers The frame and engine serial numbers uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place. Frame number Engine number...

  • Page 242: Fuels Containing Alcohol

    Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line. ●...

  • Page 243: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.

  • Page 244: Specifications

    Specifications Main Components ■ Fuel containing ETHANOL up to 10 % alcohol by volume Overall length 2,100 mm (82.7 in) Tank capacity 16.1 L (4.25 US gal, 3.54 Imp gal) Overall width 745 mm (29.3 in) CBR1000ST Overall height 1,140 mm (44.9 in) YTZ7S Wheelbase 1,455 mm (57.3 in)
  • Page 245 If not available, use SAE 80 or 90 gear oil. Idle speed 1,400 ± 100 rpm Drive chain slack 25 - 35 mm (1.0 - 1.4 in) Honda 4-stroke motorcycle oil API Service DID525HV3KAI or RK525ROZ8 Standard drive Classification SG or higher, excluding oils...
  • Page 246 Specifications Bulbs Torque Specifications ■ ■ Headlight Under cowl bolt 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft) Brakelight/Taillight Under cowl pan screw 10 N·m (1.0 kgf·m, 7 lbf·ft) Front turn signal / Position light Oil filter 26 N·m (2.7 kgf·m, 19 lbf·ft) Rear turn signal Engine oil drain bolt 30 N·m (3.1 kgf·m, 22 lbf·ft)

  • Page 247: Index

    Index ABS (Anti-lock Brake System)....... 16 Catalytic Converter........239 ABS (Anti-lock Brake System) Clutch System..........172 Indicator ..........94, 199 Coolant ............ 144, 161 ABS Mode Indicator........55 Coolant Temperature Gauge ......51 Accessories ............20 Activating the Electrical System in an Emergency ............
  • Page 248 High beam indicator....27, 28, 29, 30, 31 High Coolant Temperature Indicator ..........55, 197 Flooded Engine ..........116 Honda Smart Key Indicator ....95, 201 Frame Number ..........237 Horn Button ............98 Front Seat ............153 Front Suspension........... 179...
  • Page 249 Damper)............ 55, 199 FUEL ..............12 High Coolant Temperature ....55, 197 Radiator Cap ............10 Honda SMART Key ........95, 201 Rear Cushion............11 Left Turn Signal ..........93 Safety Reminder ..........12 Low Oil Pressure ........55, 198 Tyre Information &...
  • Page 250 Overheating ............ 197 Maintenance Owner's Manual ........126, 227 Fundamentals ........... 134 Importance............128 Safety ..............128 P Value ............. 111 Schedule ............129 Parking ............... 17 Maximum Weight Limit ......... 21 Parts Location........... 22 Meter PASSING/LAP Switch ........98 Odometer............
  • Page 251 Service Diagnostic Recorders ..... 222 Rear Seat............154 Setting Mode ............ 62 Rear Suspension ..........182 Shift Indicators ..........93 Recommended Shifting Gears ..........117 Coolant............... 144 Side Stand ............167 Fuel..............124 Side Stand Ignition Cut-off System ..167 Oil ................
  • Page 252 Suspension Torque Control Indicator ....... 93 Front..............179 Torque Control OFF Indicator....... 93 ÖHLINS Smart EC System ......185 Transporting ........... 235 Rear..............182 Tripmeter............227 S Mode............... 111 Troubleshooting ..........195 Switch Turn Signal Switch........... 98 Brakelight............166 Tyres Engine Stop..........
  • Page 253 32MKR800 XXX.XXXX.XX.L 00X32-MKR-8000 00X32-MKR-8000 PRINTED IN XXXXX...

This manual is also suitable for:

Cbr1000sp 2019

Table of Contents