Ricoh B064 SERIES Service Manual page 1096

OVERALL MACHINE INFORMATION
7.2 ELECTRICAL COMPONENT DESCRIPTION
Symbol
Motors
M01 Shift Tray Exit
M02 Shift Tray Lift
M03 Exit Guide
M04 Lower Transport
M05 Shift
M06 Positioning Roller
M07 Stacking Roller Drag
M08 Stacking Roller
M09 Jogger
M10 Stack Feed-Out Belt
M11 Stack Plate - Center
M12 Stapler
M13 Stack Plate – Front
M14 Stack Plate – Rear
M15 Stapler Rotation
M16 Staple Hammer
M17 Punch
M18 Upper Transport
M19 Shift Jogger
M20 Shift Jogger Lift
BOARDS
Main
PCB
Stapler
PCB
Punch
PCB
PCB Jogger
SENSORS
Entrance
S01
S02 Upper Tray Exit
B478/B513/B531
CÓPIA NÃO CONTROLADA
Name
Drives the exit roller for the shift tray.
Moves the shift tray up or down.
Opens and closes the upper exit guide.
Drives the lower transport rollers, the positioning
roller and the alignment brush roller
Moves the shift tray from side to side.
Moves the positioning roller into contact with the
paper.
Moves the stacking roller in and out.
Rotates the stacking roller.
Moves the jogger fences.
Drives the stack feed-out belt.
Presses down the center of the edge for stapling.
Moves the staple unit from side to side.
Presses down the front corner of the edge for
stapling.
Presses down the rear corner of the edge for
stapling.
Rotates the stapler 45 degrees for oblique stapling.
Drives the staple hammer.
Drives the punch shaft and roller. Punch Unit B531
(option).
Drives the entrance rollers, the middle and upper
transport rollers, and upper tray exit roller.
Drives the shift jogger fences against the sides of
the sheets to align the stack, then reverses to return
them to the home position. Jogger Unit B513
(option).
Raises the shift jogger fences after aligning the
stack, then reverses and lowers them when
returning to the home position. Jogger Unit B513
(option).
Controls the finisher and communicates with the
copier.
Controls the stapler unit.
Passes signals between the punch unit and the
finisher main board. Punch Unit B531 (option).
Controls the shift/jogger unit B513 (option).
Detects the copy paper entering the finisher and
checks for misfeeds.
Checks for misfeeds at the upper tray.
48
CÓPIA NÃO CONTROLADA
Function
SM