Network Parameters Required - Agilent Technologies 4155C User Manual

Table 3-2
NOTE
NOTE
Connecting to Network
If You Use a Windows PC

Network Parameters Required

To set up a server, the following network parameters are required. These parameters
are usually assigned and managed by the network administrator. Contact the
network administrator of your site to acquire the parameter values.
Network Parameters
Parameter
a
Computer name
Workgroup or Domain
IP address of computer
Subnet mask
IP address of Gateway
a. A maximum 15 alphanumeric characters is available for the
4155C/4156C.
If you are going to use the DHCP server, you need only the computer name and the
domain name. The DHCP server assigns the IP address automatically, and changes
it dynamically.
If you connect the computer to the 4155C/4156C directly and never connect to a
local area network, assign the computer name and IP address by yourself.
For the workgroup name, set WORKGROUP.
Do not set the subnet mask and the IP address of gateway.
3-20
Example value used in this section
PC001
DOMAIN1
192.168.1.1
255.255.255.0
192.168.1.3
Agilent 4155C/4156C User's Guide Vol.1, Edition 11