Agilent Technologies 4155C User Manual page 188

Print/Plot Function
Saving Measurement Data Graphs
To set the output region to the upper half of the paper, the OUTPUT REGION
should be defined as follows:
*OUTPUT REGION
UPPER LEFT
LOWER RIGHT
8. Optional: Enter a comment of up to 58 characters in the PRINT/PLOT
COMMENT field. This comment is printed only when this field is enabled on
the SYSTEM: PRINT/PLOT SETUP screen.
9. To start printing/plotting, select PRINT/PLOT softkey.
10. To close the GRAPH PLOT dialog box, select EXIT softkey.
5-36
X 0% Y 0%
X 100% Y 50%
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
<--origin of printer